期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

黏土对超临界CO2在聚乳酸中溶解性能的影响

Effect of Clay on Solubility of Supercritical Carbon Dioxide in Polylactic Acid
原文传递
导出
摘要 采用体积法测量超临界CO2在聚乳酸(PLA)及PLA/黏土纳米复合材料中的溶解性能,研究黏土对超临界CO2在PLA中溶解速率和溶解度的影响。结果表明:黏土的存在使超临界CO2在PLA中的溶解速率大大降低,溶解度从纯PLA的12.7%降低到复合材料的5.1%(测试温度170℃、压力10 MPa),降幅达60%。从材料的流变性能和结晶性能两方面分析其内在原因。 The solubility of supercritical carbon dioxide in Polylactic acid （PLA） and PLA/clay nanocomposite was measured according to volumetric method. Effect of clay on the solubility was investigated. Results showed that the addition of clay greatly decreased the dissolution rate of supercritical carbon dioxide in PLA. The solubility was from 12. 7 % of pure PLA to 5.1% of nanocomposite at 170 ℃ and 10 MPa,decreased by 60 %. It＇ s reason was analyzed from the view point of dynamical rheological property and crystallization.
作者 谢格峰 蒋果 黄汉雄 陈兆科
机构地区 华南理工大学机械与汽车工程学院
出处 《塑料》 CAS CSCD 北大核心 2010年第2期58-60,共3页 Plastics
基金 国家自然科学基金青年基金项目(50803020)
关键词 体积法 超临界CO2 溶解度 聚乳酸 聚乳酸/黏土纳米复合材料 volumetric method supercritical carbon dioxide solubility polylactie acid PLA/elay nanocomposite
分类号 Q946.816 [生物学—植物学]
  • 相关文献

参考文献11

  • 1于慧洁,郭奕崇,信春玲,何亚东.聚苯乙烯微孔发泡挤出成型研究[J].塑料,2007,36(5):66-69. 被引量：9
  • 2Lee M,Park C B,Tzoganakis C. Measurements and modeling of PS/ supercritical CO2 solution viscosities [ J ]. Polym Eng Sci, 1999,39 (1) :99 -109.
  • 3Lee M ,Tzoganakis C,Park C B. Effects of supercritical CO2 on the viscosity and morphology of polymer blends [ J ]. Adv Polym Tech, 2000,19(4) :300 -311.
  • 4Xue A L. Extrusion of PS/LDPE blends with supercritical carbon dioxide, morphology, viscosity and interfacial tension [ D ]. Waterloo : The University of Waterloo,2002.
  • 5Zhao Y,Huang H X. Effect of supercritical CO2 on morphology and rheology of polymer nanocomposites prepared by melt compounding [ M ]. CA, United states : AIChE Annu Meet Conf Proc San Francisco, 2006.
  • 6Thellen C, Orroth C, Froio D, et al. Influence of montmorillonite layered silicate on plasticized poly(1-1actide) blown films[J]. Polymer,2005, 46(25) :11 716-11 727.
  • 7Shah V M ,Hardy B J,Stern S A. Solubility of carbon dioxide,methane, and propane in silicone polymers. Effect of polymer backbone chains [ J ]. J Polym Sci ( Part B ) : Polym Phys, 1993,31 ( 3 ) :313 - 317.
  • 8Nalawade S P,Picchioni F,Janssen L P B M,et al. Solubilities of suband supercritical carbon dioxide in polyester resins[ J]. Polym Eng Sci, 2006,46 ( 5 ) : 643 - 649.
  • 9Zhang C, Wyatt J, Weinkauf D H. Carbon dioxide sorption in conventional and plasma polymerized methyl methacrylate thin films [J]. Polymer,2004,45(22) :7 665 -7 671.
  • 10Oliveira N S, Dorgan J, Coutinho J A P, et al. Gas solubility of carbon dioxide in poly(lactic acid) at high pressures[J]. J Polym Sci(Part B): Polym Phys,2006 ,44 (6) : 1 010 - 1 019.

二级参考文献7

  • 1Baldwin D F,Suh N P,Park C B.Supermicrocellular foamed marterials[P].US Patent:5 334 356,1994-08-02.
  • 2Martini J E.The production and analysis of microcellular foam[D].Massachusetts Institute of Technology,1981.
  • 3Shimbo M,Baldwin D F,Suh N P.The viscoelastic behavior of microcellular plastics with varying cell size[J].Polymer Engineering and Science,1995,35 (17):1387-1393.
  • 4Seeler K A,Kumar V,VanderWel M.Experimental characterization of the tensile behavior of microcellular polycarbonate foams[J].J Eng Mater Technol,1994,116(4):439 -445.
  • 5Collias D I,Baird D G,Borggreve R J M.Impact toughening of polycarbonate by microcellular foaming[J].Polymer,1994,35 (18):3978-3983.
  • 6Martini-Vvedensky J E,Suh N P,Waldman F A.Microcellular closed cell foams and their method of manufacture[P].US,Patent:4,473,665,1984-09-25.
  • 7Haguib H E,Park C B.Strategies for achieving ultran lowdensity polypropylene foams[J].Polymer Engineering and Science,2002,42(7):1481-1492.

共引文献8

塑料
2010年 第2期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部