期刊文献+

海水淡化泵水润滑轴承间隙的优化设计 被引量:13

Optimization design for water buricated bearing clearance of seawater-desalination pump
下载PDF
导出
摘要 针对海水淡化高压泵水润滑轴承存在的润滑问题,设计了6种不同轴承半径间隙的水润滑轴承;用三维造型软件Pro/E建立了滑动轴承内部三维流动水膜数学模型;利用Fluent 6.2进行非结构化六面体/楔形网格划分,采用RNGk-ε湍流模型和SIMPLE算法,对不同轴承半径间隙内水膜的三维流场和同一轴承半径间隙不同偏心距下的水润滑轴承的动特性进行了模拟,得到了轴承内部动压力分布以及流量、承载力、刚度与轴承半径间隙之间的关系.结果表明,所研究的水润滑轴承在半径间隙为0.2 mm时性能最佳.模拟结果可以对水润滑轴承的润滑特性进行预测,可为高压泵水润滑轴承的优化设计和安全运行提供参考. Six water lubricated bearings with different clearance were designed to solve lubricating pro-blems in high-pressure pumps for seawater desalination.The models were built by three-dimensional software Pro/E.Based on k-ε two-equation turbulence model and SIMPLE algorithm,the interior flow field in different bearings clearances and the same bearing clearance at different eccentric distances were numerically simulated and analysed with Fluent software.The relationship of dynamic pressure distribution,bearing capacity,stiffness and bearing clearance were obtained.Simulation results show that the perfor-mance of water lubricated bearing is the best at the clearance of 0.2 mm.Simulation results can predict the characteristics of water lubricated bearings,and provide the reference for optimization design and safe-operation for high-pressure pump.
出处 《排灌机械工程学报》 EI 2010年第2期117-121,共5页 Journal of Drainage and Irrigation Machinery Engineering
基金 国家科技支撑计划项目(2006BAB03A02) 江苏省高技术研究项目(BG2006024)
关键词 轴承 径向间隙 水润滑 流场 海水淡化 bearing radial clearance water-lubrication flow fields seawater-desalination pump
  • 相关文献

参考文献9

  • 1Baumgarten S. Hydraulic comparison of high pressure pumps for RO desalination systems [ J ]. World Pumps, 2005 (463) :52 - 55.
  • 2叶晓琰,杨孙圣,许建强,胡敬宁.基于CFD技术的高压泵液力端优化设计[J].排灌机械,2008,26(6):31-35. 被引量:12
  • 3Hua Xijin, Wang Jiaxu, Zhu Juanjuan, et al. Study on tribological behavior of water-lubricated bearings [ J ]. Joural of Advanced Manufacturing Systems ,2008,7 ( 1 ) : 115 -121.
  • 4Guo Zenglin, Hirano T, Kirk R G. Application of CFD analysis for rotating machinery-Part I: hydrodynamic, hydrostatic bearings and squeeze film damper[J]. Journal of Engineering for Gas Turbines and Power, 2005, 127(2) : 445 -451.
  • 5Yu Hao, Kivilathti J. CFD modelling of the flow field inside a reflow oven [ J ]. Soldering and Surface Mount Technology, 2002,14( 1 ) :38 -44.
  • 6Nabhan M b W, Ibrahim G A, Anabtawi M Z. Analysis of hydrodynamic journal bearings lubricated with a binary water-based lubricant [ J ]. Wear, 1997,209 ( 1/2 ) : 13 -20.
  • 7陶海坤,祝宝山,曹树良,陆力.钟形进水流道吸水室后壁的优化设计[J].江苏大学学报(自然科学版),2007,28(3):228-231. 被引量:9
  • 8陆林广,伍杰,陈阿萍,秦钟建.立式轴流泵装置的三维湍流流动数值模拟[J].排灌机械,2007,25(1):29-32. 被引量:23
  • 9杨敏官,高波,贾卫东,王春林,吴纳新.熔盐泵轴承冷却及润滑系统的分析[J].江苏大学学报(自然科学版),2005,26(2):149-152. 被引量:10

二级参考文献23

共引文献49

同被引文献102

引证文献13

二级引证文献71

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部