期刊文献+

激光-短路MAG复合热源焊接过程稳定性的影响因素 被引量:8

Two factors influencing welding process stability of Nd:YAG laser-short circuit arc MAG hybrid welding
下载PDF
导出
摘要 以低碳钢为研究对象,通过焊接电弧分析仪,对比研究了激光-短路MAG电弧复合热源焊接过程中焊接速度、激光与电弧的相对位置对焊接过程稳定性的影响规律.结果表明,随着焊接速度增加,MAG和激光-短路MAG复合热源焊接过程稳定性都会降低,但由于激光的引入,复合热源在高速焊接过程更稳定.与MAG相比,复合热源可以提高极限焊接速度1倍以上;复合热源焊接过程中,与激光在前引导焊接相比,电弧在前引导焊接过程稳定性更高. The effects of welding speed and welding direction on Nd:YAG laser-short current MAG hybrid welding stability were investigated. The experimental results showed that welding arc stability of MAG and laser+MAG would decrease with the increasing of welding speed, but the arc of laser+MAG get more stable comparing with MAG arc. The maximal welding speed of laser+MAG is more than one time fast comparing with that of MAG. The hybrid welding arc in arc leading direction would get more stable comparing with that of laser leading direction.
出处 《焊接学报》 EI CAS CSCD 北大核心 2010年第3期17-20,共4页 Transactions of The China Welding Institution
基金 国家科技支撑计划资助项目(2006BAF04B10) 黑龙江省自然科学基金资助项目(ZJG0601)
关键词 熔化极气体保护焊接 激光焊接 复合热源焊接 焊接过程稳定性 GMAW laser welding hybrid welding welding process stability
  • 相关文献

参考文献7

二级参考文献17

  • 1Steen W M. Arc augmented laser processing of materials [ J ]. J. Appl. Phys, 1980, 51(11): 5636-5641.
  • 2Petring D, Kaierle S, Kasimir M. Extended range of applications for laser beam welding by laser-MIG hybrid technique [ J ]. Laser Opto, 2001, 33 ( 1 ) : 50 - 56.
  • 3Dilthey U, Lueder F, Wieschemann A. Technical and economical advantages by synergies in laser arc hybrid welding[ J]. Welding in the Workd, 1999, 43(4) : 141 - 152.
  • 4Shida T, Hirokawa M, Fujikura N, et al. Welding of aluminum alloys by using high power CO2 laser in combination with MIG arc[A]. 6th International conference on welding and melting by electron and laser beams[ C]. Toulon, 1998. 399 -406.
  • 5Avilov V V, Decker I, Pursch H, et al. Study of a laser- enhanced welding arc using advanced split anode technique.Welding Journal, 1994,11(2):112-123
  • 6Lu Dengping, Zhang Shaobin, Hu Shengsun, et al. Study on mechanism of mutual effect between laser and arc & its effect on weld penetration. China Welding, 1993,2(2) :104-108
  • 7Steen W M. Arc augmented laser processing of materials. J.Appl.Phys,1980,51(11):5634-5641
  • 8Steen W M , Eboo M . Arc augmented laser welding . Metal Construction, 1979,7:2-4
  • 9Diebold T P, Albright C E. Laser - GTAM welding of aluminium alloy 5052. Welding Journal, 1984,63:18-24
  • 10Matsuda J, Utsumi A. TIG or MIG augmented laser welding of thick mild steel plate. Joining & Materials,1988,7:31-34

共引文献76

同被引文献68

引证文献8

二级引证文献44

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部