期刊文献+

GCr15轴承钢棒材连轧过程温度场数值模拟 被引量:2

Numerical Simulation of Temperature Field for GCr15 Bearing Steel Bar during Continuous Rolling Process
下载PDF
导出
摘要 建立了GCr15轴承钢(0.99%C、1.47%Cr)160 mm×160 mm方坯经粗轧、一中轧、二中轧、KOCKS轧机轧成Φ25.0 mm和Φ35.0 mm的轧件温度场预测模拟系统;研究了轧件轧制过程中温度的变化,一中轧入口轧制速度(0.55 m/s和1.1 m/s)对轧制过程轧件温度的影响,以及轧后冷却工艺(2段式和3段式快冷)对轧件温度的影响。结果表明,轧件温度的计算值和实测值的相对误差≤3%。 A system of numerical simulation to predict temperature field of rolling stock of bearing steel GCr15 (0. 99% C, 1.47% Cr) from 160 mm×160 mm billet rolling to Ф25.0 mm and Ф35.0 mm bar by rough rolling, Nol and No2 intermediate passes roiling and KOCKS mill roiling has been established to study the change of temperature of stock during roiling, the effect of inlet rolling speed at Nol intermediate passes (0. 55 m/s and 1.1 m/s) on temperature of stock during rolling process and the effect cooling process after rolling (2 segment quick cooling and 3 segment quick cooling) on temperature of stock. Results show that the relative errors between calculated values and measured values are ≤3%.
出处 《特殊钢》 北大核心 2010年第3期6-9,共4页 Special Steel
基金 "十一五"国家科技支撑计划项目(2006BAE03A08)
关键词 GCR15轴承钢 棒材 温度场 数值模拟 GCr15 Bearing Steel, Bar Product, Temperature Field, Numerical Simulation
  • 相关文献

参考文献8

二级参考文献24

  • 1原思宇,张立文,廖舒纶,李茂,于永泗,齐民,甄玉,郭书奇.棒线材多道次轧制过程的静力隐式有限元模拟及模型优化[J].塑性工程学报,2005,12(4):54-57. 被引量:12
  • 2原思宇,张立文,齐民,甄玉,郭书奇.推动模型在棒线材轧制过程模拟中的应用[J].钢铁,2005,40(12):50-54. 被引量:4
  • 3Sellars C M.Computer Modeling of Hot Working Processes[J].Mater.Sci.and Tech.,1985,14:325-332.
  • 4Devadas C,Samarasekera I V,Hawbolt E B.The Thermal and Metallurgical State of Steel Strip During Hot Rolling:Part Ⅰ.Characterization of Heat Transfer[J].Metall.Trans.A,1991,22A:307-319.
  • 5Devadas C,Samarasekera I V.Heat Transfer During Hot Rolling of Steel Strip[J].Ironmaking and Steelmaking,1986,13(6):311-321.
  • 6Chen W C.Thermomechanical Phenomena During Rough Rolling of Steel Slab[D].British Columbia:The University of British Columbia,1991.
  • 7Tang G B,Liu Z D,Wang W,et al.Numerical Simulation of Thermal Evolution During Hot Deformation for 2050 Hot Rolling Mill at Baosteel[A].Proceedings of the Second International Conference on Advanced Structural Steels (ICASS2004)[C].Shanghai,2004.1011-1014.
  • 8Kwon H C,Lee Y,Kim S Y,et al.Numerical Prediction of Austenite Grain Size in Round-Oval-Round Bar Rolling[J].ISIJ Int.,2003,43 (6):676-683.
  • 9Huang C J,Zhang H,Nan Y J,et al.A Discussion of the Formation of Ultra-fine Grains in Low-Carbon Steels Based on FE Analysis[J].Comput.Mater.Sci.,2002,25:371-377.
  • 10Toshikazu.Recent development of bearing steel in Japan[J].Transactions of the Iron and Steel Institute of Japan,1988,28(11):893-899.

共引文献42

同被引文献30

引证文献2

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部