期刊文献+

催化裂化汽油催化氧化及萃取深度脱硫研究 被引量:2

Research on Deep Desulphurization of FCC with Catalytic Oxidation and Extraction
原文传递
导出
摘要 以空气作氧化剂,乙酸作催化剂,甲醇作萃取剂,将催化氧化与萃取分离相结合,对催化裂化汽油进行了氧化萃取脱硫研究。结果表明,在空气压力为0.5MPa,乙酸/汽油体积比为1/6,氧化温度为50℃,氧化时间为40min的最佳处理条件下,汽油的硫含量可从574.155μg/g降至106.79μg/g,脱硫率为81.4%,汽油的收率为94.3%。 The process of oxidation and solvent extraction desulphurization of FCC was studied with using air as oxidant, acetic acid as catalyst and methanol as extraction agent. The result showed that the sulfur content of FCC dropped from 574.155μg/g to 106.79μg/g with a desulfurization rate of 81.4% and a gasoline yield of 94.3% under the optimum conditions, such as the pressure was 0.5MPa, the volume ratio of acetic acid to gasoline was 1/6, the oxidation temperature was 50℃ and the oxidation time was 40 min.
出处 《化学与粘合》 CAS 2010年第3期38-41,共4页 Chemistry and Adhesion
关键词 催化裂化汽油 催化氧化 脱硫 萃取 空气 乙酸 FCC catalytic oxidation desulfurization extraction air acetic acid
  • 相关文献

参考文献6

二级参考文献49

  • 1陈焕章,李永丹,赵地顺.催化裂化汽油脱硫技术进展[J].化工科技,2004,12(3):46-51. 被引量:26
  • 2周瀚成,陈楠,石峰,邓友全.离子液体萃取脱硫新工艺研究[J].分子催化,2005,19(2):94-97. 被引量:66
  • 3殷长龙.催化裂化汽油中硫化物形态及含量分布的研究[M].东营:石油大学(华东),1999..
  • 4袁铁.[D].北京:清华大学化学工程系,2000.
  • 5殷长龙,学位论文,1999年
  • 6Forte P.Process for the removal of sulfur from petroleum fractions[P].US 5582714,1996.
  • 7Wormsbecher R F,Kim G.Sulfur reduction in FCC gasoline[P].US 5525210,1996.
  • 8GIL J Greenwood,Dennis Kidd Khare.Next generation sulfur removal technology[A].2000 NPRA Annual Meeting[C].San Antonio,AM-00-12.Washington:National Petrochemical & Refiners Association,2000.
  • 9Kalghatgi.GT. Fuel anti—knock quality—Part I.Engine Studies[R].SAE Paper.2001.
  • 10Kalghatgi GT.Fuel anti—knock quality—Part Ⅱ.Vehicle studies—how relevant is Motor Octane Number(noN)for modern engines?[R].SAE Paper.2001.

共引文献178

同被引文献30

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部