期刊文献+

不同粒度红花粉体理化性质的比较研究 被引量:11

Comparative Study of Physicochemical Properties of Carthamus tinctorius L.Powders with Different Sizes
原文传递
导出
摘要 目的比较研究不同粒度红花粉体的理化性质,确定红花超微粉体的粒度。方法分别考察4种不同粒度红花粉体的形态结构、吸湿性、比表面积及孔容,采用HPLC测定红花粉体中羟基红花黄色素A的含量、液相图谱及体外溶出行为。结果随红花粉体粒度的减小,其细胞破壁率增大,比表面积及孔容增加,吸湿性增加;4种粒度红花粉体中羟基红花黄色素A的含量相近,HPLC谱图相似;D90为65.4与29.4μm的红花粉体溶出度相似。结论疏松的细胞间连接而非破壁是增加红花羟基红花黄色素A溶出的必要条件,红花超微粉体D90宜控制在29.4~65.4μm内。 OBJECTIVE To investigate physicochemical properties of ultrafine powders of Carthamus tinctorius L.and to determinate particle size distribution for ultrafine powders of Carthamus tinctorius L.METHODS Morphology structure,hygroscopic property,surface area and pore volume of Carthamus tinctorius L.powders were investigated.The contents and the in vitro dissolution of hydroxysafflor yellow A and HPLC chromatograms of Carthamus tinctorius L.powders were determined by HPLC.RESULTS With the decreasing of particle size of powders,the cell-wall breaking ratio,surface area,pore volume and moisture increased.The contents and HPLC chromatograms of four Carthamus tinctorius L.powders were similar to each other.Dissolution curves of hydroxysafflor yellow A of powder with D90 of 65.4 μm and similar to powder with D90 of 29.4 μm.CONCLUSION Loose intercellular junction without wall-broken was necessary condition for the increasing of dissolution hydroxysafflor yellow A and the D90 of ultrafine powders should be controlled in the range of 29.4 to 65.4 μm.
出处 《中国药学杂志》 CAS CSCD 北大核心 2010年第8期602-607,共6页 Chinese Pharmaceutical Journal
基金 国家中医药管理局公益性行业科研专项(200807054) 江西省对外科技合作项目(2008BB24800)
关键词 红花 超微粉碎 理化性质 溶出度 Carthamus tinctorius L. superfine comminution physicochemical properties dissolution
  • 相关文献

参考文献4

二级参考文献55

  • 1方芸.药材粉末细度对逐瘀扶正胶囊溶出度的影响[J].中国医院药学杂志,1995,15(4):172-174. 被引量:6
  • 2吴哲浩.谈谈气流粉碎技术用于农药加工[J].农药,1987,(2):3-4.
  • 3郭学东.山茱萸普通粉碎和微分化处理在溶出速率上的比较[J].首都医药,2000,7(8):45-45.
  • 4[3]Urakaev F K,Boldyrev V V.Mechanism and kinetics of mechanochemical processes in comminuting devices,1.Theory[J].Powder Technology,2000,107(1):94-107
  • 5[4]Urakaev F K,Boldyrev V V.Mechanism and kinetics of mechanochemical processes in comminuting devices,2.Applications of the theory[J].Powder Technology,2000,107(2):197-206
  • 6[5]Venkataraman K S,Narayanan K S.Energetics of collision between grinding media in ball mills and mechanochemical effects[J].Powder technology,1998,96(3):190-201
  • 7[6]Gary R.Molecular aspects of the fatigur and fracture of rubber[J].Rubber Chemistry and Technology,1994,67(3):529-536
  • 8[7]Balaz A,Alaeova M,Achimovieova J,et al.Godocikova.Mechanochernistry in hydromctallurgy of sulphide minerals[J].Hydrometallurgy,2005,77:9-17
  • 9[8]Giovanni M,Paolo P Mechanchemical dissociation of calcium carbonate:laboratory data and relation to natural emissions of CO2[J].Physics of the Earth and Planetary Interiors,2004,142:205-214
  • 10[9]Lin C K,Du C L,Chon G S,et al.Structural investigation of iron sulfides synthesized by mechanochemical reaction[J].Materials Science and Engineering,2004,A375-377:834-838

共引文献158

同被引文献128

引证文献11

二级引证文献95

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部