摘要
Effects of operating conditions and device's geometrical sizes on geometrical properties of wall-attaching transonic jet between two parallel plat plates are numerically simulated. Conclusions are as follows: 1) Upriver part of the wall-attaching jet's center streamline is in good accordance with parabola; 2) When both gas inlet pressure and outlet pressure as well as their ratio are not too high ( the outlet pressure is less than 10 MPa and the pressure ratio is less than 3), the center streamlines of the wall-attaching jet with the same pressure ratio coincide with each other very well, and the deflection degree of the center streamline decreases with rise of the pressure ratio; 3) The deflection degree of the jet's center streamline decreases with either broadening of nozzle's throat or rise of wall offset; 4) With rise of the pressure ratio, attachment distance of the jet increases, but the increase rate descends; 5) The attachment distance ascends with rise of either the nozzle's throat or the wall offset.
基金
Chinese 863 National Program Foundation(No.2006AA05Z216)
