摘要
采用直线刃阴极进行电解加工平面的工艺试验,对试验结果进行分析,得到电解液压力、阴极进给速度、电源电压、极间初始间隙与表面粗糙度、切削深度的关系曲线。在此基础上,选取优化的参数组合,实现了直纹曲面的加工。
The experiments of machining plane were carried out on NC-ECM with linear edge cathode.Based on the results of experiments,the influences of electrolyte pressure,cathode feed rate, working voltage,initial inter-electrode gap to the surface roughness and cutting depth were obtained. On the base of orthogonal experiment,the ruled surface machining was finished by selecting the optimal processing parameters.
出处
《电加工与模具》
2010年第3期29-32,共4页
Electromachining & Mould
基金
国家大学生创新性实验计划项目(GJ0839)
关键词
直线刃阴极
电解加工
工艺试验
linear edge cathode
electrochemical machining
experiment