期刊文献+

Ni/AlMCM-41催化剂上正庚烷的临氢异构化研究 被引量:2

Reserch of Ni/AlMCM-41 Catalyst in the Hydroisomerization of n-heptane
下载PDF
导出
摘要 合成了不同硅铝比的Al MCM-41型分子筛,并制备了Ni-Al MCM-41催化剂,以正庚烷的异构化为模型反应,在连续流动固定床反应器上考察还原温度、反应温度、Ni负载量、Si/Al等对庚烷异构化反应的影响.研究结果表明,在还原温度410℃、反应温度300℃、Ni负载量3%-4%、Si/Al=20的条件下,正庚烷的转化率达到70%,其异构化选择性达到44.5%.通过表征,确定催化剂具有中孔结构、较高的比表面(氢型925.41 m2/g)、规则的孔径(4.032 nm)和适宜的酸性. A series of mesoporous molecular sieves of AkMCM-41 with different Si/Al ratio were synthesized and Ni supported on AlMCM-41 catalysts were prepared. The effect of reduction temperature, reaction temperature, loading amount of Ni and Si/Al on heptane isomerization were investigated in a conventional fixed bed reactor for n-heptane isomerization reaction. The results showed that under the conditions of reduction temperature 410 ℃, reaction temperature 300 ℃, loading amount of Nickel 3 % -4%, Si/Al=20,the conversion of n-heptane was 70 %, with 44.5 % isomerization selectivity. The characterized results demonstrated that the catalysts had mesoporous structure, high surface area(925.41 m^2/g), regular pore size(4. 032 nm) and mild acidity.
出处 《内蒙古师范大学学报(自然科学汉文版)》 CAS 2010年第3期296-301,共6页 Journal of Inner Mongolia Normal University(Natural Science Edition)
关键词 Ni/AlMCM-41催化剂 正庚烷 异构化 Ni-AlMCM-41 catalyst heptane isomerization
  • 相关文献

参考文献5

二级参考文献64

  • 1陈晓银 丁国忠 等.-[J].中国科学:B辑,1997,27:63-63.
  • 2龙英才 董维阳 等.-[J].科学通报,1997,42:938-938.
  • 3袁忠勇 王敬中 等.-[J].南开大学学报:自然科学版,1996,29(3):107-107.
  • 4袁忠勇.硕士学位论文[M].天津:南开大学,1996..
  • 5袁忠勇 王敬中 等.第九届全国波谱学学术会议论文接要集[M].承德:-,1996..
  • 6王毅.硕士学位论文[M].天津:南开大学,1996..
  • 7李晋平,刘光焕,李安平,董晋湘.在蒸气相中合成中孔分子筛MCM-41及其孔结构参数的表征[J].燃料化学学报,1997,25(1):37-41. 被引量:6
  • 8[2]Srikant Gopal, Panagiotis G Smirniotis. Pt/H-ZSM-12 as a catalyst for the hydroisomerization of C5-C7 n-alkanes and simultaneous saturation of benzene[J]. Appl Catal A: 2003, 247(1):113-123.
  • 9[4]Miller S J. Catalytic dewaxing process for lube oils using a combination of a silicoaluminophosphate molecular sieve catalyst and an aluminosilicate zeolite catalyst[P]. USP 5149 421 A, 1992.
  • 10[6]Miller S J. Three-step catalytic dewaxing and hydrofinishing[P]. US 4 747 932, 1988.

共引文献59

同被引文献40

引证文献2

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部