期刊文献+

弹性支承箔片动压气体径向轴承的实验研究 被引量:4

Experimental Study on the Compliant Foil Journal Bearing with Elastic Support
下载PDF
导出
摘要 对新型结构弹性支承箔片动压气体径向轴承进行试验研究,在高速透平膨胀机(主轴轴径D=25.0mm、转子总长l=250.5mm、转子质量Gm=891g、额定工作转速10.64×104r/min)上达到了转子转速14.8×104r/min、超速40%的良好试验效果。对这种弹性支承箔片动压气体径向轴承的振动特性和稳定性进行试验研究。结果表明,该轴承具有优良的动态特性与稳定性,能有效抑制高速自激涡动的发展,在正确选择结构参数和表面处理方法后,有望替代目前在高速透平机械中广泛应用的静压气体轴承。 The compliant foil journal bearing (CFB) with elastic support was applied to a high speed turbo-expander (the nominal working speed is about 106 400 r/min,the journal diameter is 25.0 mm and the rotor mass is 891 g).It can support the rotor steadily revolving at 14.8×104 r/min,which is over speed 40%.The rotation characteristics,stability and dynamic tests of this compliant foil journal bearing with elastic support were conducted. Experimental results indicate that the CFB presented here offers preferable system dynamic and stability performance and has adequate damping to effectively reduce the possibility of self-excited and fractional frequency whirl.It can be confirmed that the application of this type of CFB to the high speed turbo machinery is feasible.
出处 《润滑与密封》 CAS CSCD 北大核心 2010年第6期1-4,共4页 Lubrication Engineering
基金 国家自然科学基金项目(56976082) 高等学校博士学科点基金项目(20090201110006)
关键词 气体轴承 动压气体轴承 箔片轴承 gas bearings aerodynamic bearings foil bearings
  • 相关文献

参考文献5

  • 1Blok H,Van Rossum J J.The foil bearing-a new departure in hydrodynamic lubrication[J].Lubrication Engineering,1993,9(6):316-320.
  • 2Rubio D,San Andres L.Structural stiffness,dry friction coefficient,and equivalent viscous damping in a bump-type foil gas bearing[J].ASME J Eng Gas Turbines Power,2007,129 (2):494-502.
  • 3侯予,赵祥雄,赵红利,陈纯正.弹性支承箔片动压气体径向轴承理论模型的研究[J].润滑与密封,2008,33(6):1-5. 被引量:9
  • 4侯予,王瑾,熊联友,陈纯正.高速透平气体轴承试验台的建立[J].润滑与密封,2003,28(5):17-19. 被引量:9
  • 5Hou Y,et al.Durability and Stability Analysis of New Compliant Foil Journal Bearing with Elastic Support Using Different Surface Treatment[J].Tribology Transactions,2008,51(2):187-192.

二级参考文献13

  • 1[2]H Blok,J J Van Rossum.The foil bearing-a new departure in hydrodynamic lubrication[J].Lubrication Engineering,1993,9 (6):316-320.
  • 2[3]S Gray,H Heshmat,B Bhushan.Technology progress on compliant foil air bearing systems for commercial applications[C].Eighth International Gas Bearing Symposium,Leicester Polytechnic,BHRA Fluid Engineering,Cranfield,Bedford,England,Paper 6,1981:69-97.
  • 3[4]V Castelli,J Pirvics.Review of numerical methods in gas bearing film analysis[J].ASME J Lubr Tech Trans,1969,91:777 -792.
  • 4[5]H Heshmat,J Walowit,O Pinkus.Analysis gas-lubricated compliant journal bearings[J].ASME J Lubr Tech Trans,1983,105 (4):647-655.
  • 5[6]C A Heshmat,H Heshmat.An analysis of gas lubricated multileaf foil journal bearings with backing spring[J].ASME J Lubr Tech Trans,1995,117:437 -443.
  • 6[7]C P Roger Ku,H Heshmat.Structural stiffness and coulomb damping in compliant foil journal bearing:parametric studies[J].STLE Tribol Trans,1994,37 (3):455-462.
  • 7[8]C P Roger Ku,H Heshmat.Structural stiffness and coulomb damping in compliant foil journal bearing:theoretical considerations[J].STLE Tribol Trans,1994,37 (3):525 -533.
  • 8[9]M J Braun,et al.Two-dimensional dynamic simulation of a contianous foil bearing[J].Tribol Int,1996,29:61-68.
  • 9[10]K Hayashi,K Hirasata.Development of aerodynamics foil bearings for small high-speed rotor[C].Lubricants and Lubrication,Elsevier Science B.V.,1995:291 -300.
  • 10[11]Hou Y,et al.Comparative test on two kinds of new compliant foil bearing for small cryogenic turbo-expander[J].Cryogenics,2004,44 (1):69-72.

共引文献16

同被引文献15

引证文献4

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部