期刊文献+

碳纳米管/铅锡合金复合镀层的摩擦磨损性能

Tribological Properties of Carbon Nanotubes/Pb-Sn Alloy Composite Coatings
下载PDF
导出
摘要 在镀液中加入不同含量的碳纳米管,用复合电沉积工艺制备了碳纳米管/铅锡合金复合镀层,测试了其在不同载荷下的摩擦因数和磨损量,并对其磨损形貌和磨损机理进行了分析。结果表明:在相同条件下,碳纳米管/铅锡合金复合镀层的摩擦因数和磨损量均低于普通铅锡合金镀层的;当镀液中的碳纳米管含量为2 g·L^(-1)时,复合镀层的摩擦因数和磨损量最小;复合镀层的磨损机理为磨粒磨损,而不含碳纳米管的铅锡合金镀层的为粘着磨损。 Carbon nanotubes(CNTs)/Pb-Sn alloy composite coatings were fabricated by electrodepositing in the plating solutions with different CNTs contents. Friction coefficient and weight loss of the composite coatings were measured under different loads. The worn morphology and wear mechanism were analyzed. The results indicate that the CNTs/Pb-Sn alloy.composite coatings had smaller friction coefficient and weight loss than these of ordinary Pb-Sn alloy coating under the same conditiorh The coating had the smallest friction coefficient and weight loss as the concentration of CNTs was 2 g· L-1. The wear mechanism of the composite coating was abrasive wear, and the wear mechanism of the Pb-Sn alloy coating without CNTs was adhesive wear.
出处 《机械工程材料》 CAS CSCD 北大核心 2010年第7期84-87,94,共5页 Materials For Mechanical Engineering
基金 国家自然科学基金资助项目(50775041) 广东省自然科学基金资助项目(05001804) 广东省科技计划资助项目(2008B010400029)
关键词 复合电镀 碳纳米管 铅锡合金镀层 composite electroplating carbon nanotube Pb-Sn alloy
  • 相关文献

参考文献13

二级参考文献63

共引文献93

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部