期刊文献+

A/S比对氧化锆复相陶瓷性能的影响 被引量:2

Effects of A/S Ratio on Properties of Zirconia Composites
下载PDF
导出
摘要 以锆英石细粉和α-Al2O3细粉作原料,根据ZrO2-Al2O3-SiO2系相图选择3个配料点(A/S比分别为0.8,1.5,2.0)制备了反应烧结氧化锆复相陶瓷。借助XRD和SEM探讨了A/S比对氧化锆复相陶瓷常温性能的影响。结果表明:A/S比的增加有利于提高坯体的可烧结性;A/S比影响材料的物相组成,实验结果与预期结果一致;1550℃烧后、A/S=2.0的氧化锆复相陶瓷具有优良的常温力学性能,耐压强度可达462 MPa,抗折强度112.2 MPa。 Zirconia composites were prepared with zircon powder and α-Al2O3 powder. According to phase diagram of ZrO2- Al2O3-SiO2 system , three ingredient spots ( A/S ratio 0.8,1.5,2.0) were selected and put into experiments. The effects of A/S ratio on the properties of zirconia composites were analysed using XRD and SEM. The results show that the increase of A/S ratio is helpful to improve sintering property of green body. A/S ratio influences the phase composition of products, and the experimental results are consistent with expectations. Zireonia composites have excellent mechanical properties at room temperature when A/S ratio is 2.0 and burned at 1550 ℃ , compressive strength up to 462 MPa and rupture strength 112.2 MPa .
出处 《硅酸盐通报》 CAS CSCD 北大核心 2010年第4期935-939,共5页 Bulletin of the Chinese Ceramic Society
关键词 A/S比 可烧结性 物相组成 Al2O3-SiO2 ratio sintering property phase composition
  • 相关文献

参考文献6

二级参考文献37

  • 1林振汉.氧化锆材料的特性及在结构陶瓷中的应用和发展[J].稀有金属快报,2004,23(6):6-10. 被引量:30
  • 2黄勇 ,何锦涛 ,马天 .氧化锆陶瓷的制备及其应用[J].稀有金属快报,2004,23(6):11-17. 被引量:38
  • 3甘国友,陈敬超,孙加林,周晓龙,陈秀华,杜焰.Ti-Si-C三元系化学势稳定性相图及其应用[J].昆明理工大学学报(理工版),2002,27(1):34-37. 被引量:7
  • 4余鑫萌,徐宝奎,袁发得.二氧化锆的稳定化及其应用[J].稀有金属快报,2007,26(1):28-32. 被引量:30
  • 5Stubican V S,Bay S P.Phase equilibria and ordering in the system ZrO2-CaO[J].J.Am.Cerum.Soc.,1977,60(11-12):534.
  • 6Nadler M R,Fitzsimmons E S.Preparation and properties of calcium zirconate[J].J.Am.Ceram.Soc.,1955,35(6):214.
  • 7Wu J M,J Mater Sci,1991年,26卷,4631页
  • 8Descamps P, Sakaguchi S, Poorteman M, et al. HighTemperature Characterization of Reaction-Sintered MulliteZirconiaComposites[J]. J Amer Ceram Soc, 1991, 71:2476 - 2481.
  • 9Saruhan B, Albers W, Schneider H, et al. Reaction and Sintering Mechanisms of Mullite in the Systems Cristobalite/α-Al2O3 and Amorphous SiO2/α-Al2O3 [J]. J Euro Ceram Soc, 1996, 16: 1075-1081.
  • 10Sundaresan S. Mullitization of Diphasic Aluminosilicate Gels[J]. J Amer Ceram Soc, 1991, 74: 2388-2392.

共引文献28

同被引文献25

  • 1王继宝,尹玉成,吴芸芸,李勇,梁永和.烧成温度和ZrO_2含量对镁锆制品烧结性能的影响[J].耐火材料,2005,39(6):439-441. 被引量:3
  • 2Schwartz L D, Lukaniuk C M, Etsell T H. A new production technique for molybdenum-zirconia cermets [ J ]. Advanced Engineering Material, 1999,1:111-113.
  • 3Li J, Yin Y S, Tan X Y, et al. A ZrO2 (3Y) matrix composite toughtened with Fe3 A1 intermetallic [ J ]. J. Am. Ceram. Soc. ,2005,88 (1) :235- 238.
  • 4Wang R L, Wang Z F, Wang R S, et al. Preparation and performance of AlzTiOs-ZrO2 muhiphase material [ J]. Journal of Materials Engineering,2005,5:38-41.
  • 5Zhang X H, Zhang R B, Chen G Q, et al. Mierostructure, mechanical, properties and thermal shock resistance of hot-pressed ZrO2 (3Y) -BN composites [ J ]. Materials Science & Engineering, 2008, A497 : 195-199.
  • 6Li Z Q, Liu J C, Li S, et al. Microstructure, mechanical properties and thermal shock resistance of ZrO2-LaPO4 composites [ J ]. Journal of Alloys and Compounds,2009,480(2) :863-866.
  • 7Li Z Q, Liu J C, Du H Y, et al. Thermal shock resistance of dense zirconia ceramics evaluated by indentation quench technique [ J]. Materials Science & Engineering,2009, A517 : 154-159.
  • 8Ishitsuka M, Sato T, Endo T, et al, Grain-size dependence of thermal shock resistance of yttria-doped tetragonal zirconia polycrystals [ J ]. Journal of the American Ceramics Society, 1990,73 ( 8 ) :2523-2525.
  • 9Wang R, Pan W, Chen J, et al. Synthesis and sintering of LaPO4 powder and its application [ J ]. Materials Chemistry and Physics,2003,79:30- 36.
  • 10Hasselman D P H. Elastic energy a fracture and surface energy as design criteria for thermal shock[ J]. Journal of the American Ceramics Society, 1963,46( 11 ) :535-540.

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部