期刊文献+

基于双谱滤波的脉冲星信号消噪方法 被引量:2

Denoising pulsar signals by bispectrum filters
原文传递
导出
摘要 提出了一种基于双谱相位加幅值滤波的脉冲星信号消噪方法.首先将含噪脉冲星信号变换到双谱域,利用α-删减相位滤波器对其双谱相位进行平滑滤波,并且设计了幅值α-删减加权中值平均滤波器对其双谱幅值进行滤波处理,然后再根据滤波后的双谱值来重构信号的功率谱和相位.仿真结果表明,重构的信号不仅可以消除高斯噪声,而且还对非高斯噪声进行了有效地滤波,比直接双谱重构和仅对双谱相位进行处理重构的效果都要好. A method to denoise pulsar signals is proposed by bispectrum phase and amplitude filtering. The noisy pulsar signal was transformed into bispectral domain; the bispectrum phase was filtered by α-trimmed filter, and the amplitude α-trimmed filter was introduced to process bispectrum amplitude. Then, the pulsar signal can be recovered from the filtered bispectrum. The results indicate that the reconstruction signal can eliminate Gaussian noise and filter non-Gaussian noise effectively. This method result is much better than effects of direct bispectrum reconstruction and only dealing with spectral phase.
出处 《华中科技大学学报(自然科学版)》 EI CAS CSCD 北大核心 2010年第8期9-12,共4页 Journal of Huazhong University of Science and Technology(Natural Science Edition)
基金 国家高技术研究发展计划资助项目(2007AA12Z323) 国家自然科学基金资助项目(60772139) 中国科学院精密导航定位与定时技术重点实验室开放基金资助项目(2009PNTT08)
关键词 脉冲星 信号去噪 信号重构 α-删减滤波器 双谱 滤波 pulsar signal signal denoising signal reconstruction a-trimmed filter bispectrum filtering
  • 相关文献

参考文献10

  • 1SheikhSI, Pines D J, RayPS, et al. The useofXray pulsars for spacecraft navigation[J]. Advances in the Astronautical Science, 2005, 119: 105-119.
  • 2Ashby N, Howe D A. Relativity and Timing in X-ray Pulsar Navigation[C]// International Frequency Control Symposium and Exposition. Miami: IEEE, 2006 : 767-770.
  • 3阎迪,许录平,谢振华.脉冲星信号的模糊阈值小波降噪算法[J].西安交通大学学报,2007,41(10):1193-1196. 被引量:16
  • 4谢振华,许录平,倪广仁.基于双谱的脉冲星累积脉冲轮廓时间延迟测量[J].物理学报,2008,57(10):6683-6688. 被引量:31
  • 5徐书华,黄本雄,徐丽娜.基于SIB/PCA的通信辐射源个体识别[J].华中科技大学学报(自然科学版),2008,36(7):14-17. 被引量:22
  • 6Lukin V, Totsky A, Fevralev D, et al. Adaptive combined bispectrum-filtering signal processing in radar systems with low SNR[C]//IEEE ISCAS. Island of Kos: IEEE, 2006:3 690-3 693.
  • 7Lukin V, Totsky A, Kurekin A, et al. Signal waveform reconstruction from noisy bispectrum estima- tions pre-processed by vector filters[C] // Proceedings of the Seventh International Symp on Signal Processing and Its Applications. Paris: IEEE, 2003, 2:169- 172.
  • 8Bartelt H, Lohmann A W, Wirnitzer B. Phase and amplitude recovery from bispectra[J]. Applied Optics, 1984, 72(10):3 121-3 129.
  • 9Matsuoka T, Ulrych T J. Phase estimation using the bispectrum[J]. Proceedings of the IEEE, 1984, 72(10): 1 403 1 411.
  • 10Dianat S A, Raghuveer M R. Fast algorithms for phase and magnitude reconstruction from bispectra [J].Optical Engineering, 1990, 29(5): 504-512.

二级参考文献27

共引文献64

同被引文献20

  • 1牛鹏辉,涂亚庆.一种基于双谱的正弦波初相估计方法[J].电测与仪表,2006,43(10):1-3. 被引量:4
  • 2李亚峻,李月,高颖.基于双谱幅值和相位重构的地震子波提取[J].地球物理学进展,2007,22(3):947-952. 被引量:14
  • 3Sheikh I S, Golshan A R, Pines D J. Absolute and relative positiondetermination using variable celestial X-ray sources[C]. The 30thAnn. AAS Guid. Conf. Colorado, USA ,February 3 - 7,2007.
  • 4Sheikh I S. The use of variable celestial X-ray sources for spacecraftnavigation[D]. Maryland: University of Maryland,2005.
  • 5Leahy D A. X-ray pulsar profile analysis[ J]. Royal AstronomicalSociety,1990,242:188 -193.
  • 6Emadzadeh A A, Golshan A R, Jason L. A new relativenavigation system based on X-ray pulsar measurementsSpeyer[C]. Shanghai, China, December 16 - 18, 2009,1488.
  • 7郑伟,孙守明,汤国建,等.X射线脉冲星导航半实物仿真系统:中国,G01C25/00[P]. 2010.01.08.
  • 8Arnold Rots. XTE FITS DataBase (XFDB),USA, 1996. [EB/OL]fttp ://heasarc. gsfc. nasa. gov/ xte/ data/ archive/OOREADME. pdf.
  • 9Goddard Space Flight Center. HEAdas Developer's Guide, USA,2008. [ EB/OL] http://heasarc. gsfc. nasa. gov/docs/software/lheasoft/ HEAdas Developer's Guide, pdf.
  • 10Shaw R A, Payne H E, Hayes J E. The SAX-LEGSPC datareduction and analysis system: an example of a minimalistapproach[ C]. Astronomical Data Analysis Software and SystemsIV,Baltimore, Maryland, USA, September 25 -28, 1995.

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部