期刊文献+

基于Fluent的辅助喷嘴气流流场数值模拟 被引量:17

Numerical simulation of flow field of auxiliary nozzle as affected by orifice forms of air-jet loom based on Fluent
下载PDF
导出
摘要 为研究喷孔形状对喷气织机辅助喷嘴喷射效果的影响,利用Solidworks建立辅助喷嘴喷射流道的几何模型,并通过Fluent采用RNG k-ε二方程湍流模型对高压高速可压缩的气流三维模型进行数值模拟。模拟结果表明,对于等效温度下的高压理想气流,在相同供气压力下,随着辅助喷嘴管内截面积的减小,管内气体速度反而增加,所研究的4种孔型的辅助喷嘴气流射出能力依次为7圆孔型>单矩形孔型>双圆孔型>单圆孔型。模拟结果可对喷气织机辅助喷嘴的优化提供参考。 The effect of orifice-form on the ejecting of an auxiliary nozzle of air-jet loom is simulated.A geometrical model of the ejecting channel is built up with Solidworks,and the turbulent air-jet with RNG k-ε model is simulated based on Fluent.The simulation reveals that the gas velocity increases with the auxiliary nozzle pipe inner-sectional area decreasing under the same pressure of supply gas with respect to ideal high pressure air flow at equivalent temperature,and the ejecting capacity of four orifice forms of auxiliary nozzle supplied with the same air-pressure showed the following order: 7 circular orifices single rectangular orifice circular twin-orifice single circular orifice.The results of simulation provide a reference for optimizing parameters of auxiliary nozzle of air-jet loom.
出处 《纺织学报》 EI CAS CSCD 北大核心 2010年第8期122-124,129,共4页 Journal of Textile Research
基金 上海市科技攻关项目(08111100704)
关键词 辅助喷嘴 喷孔形状 FLUENT 数值模拟 喷气织机 auxiliary nozzle orifice-form Fluent numerical simulation air-jet loom
  • 相关文献

参考文献8

二级参考文献11

共引文献20

同被引文献85

引证文献17

二级引证文献78

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部