期刊文献+

倒置式电火花超声复合加工装置 被引量:4

EDM with USM Machining Equipment in Inverted Layout
下载PDF
导出
摘要 为了解决大深径比微孔的难加工问题,提出了倒置式电火花超声复合加工的想法。并在原理性实验装置与加工实验的基础上,开发设计了基于工件附加超声振动方案下的改进型加工装置——倒置式电火花超声复合加工装置。主要完成了装置的总体方案设计、功能部件设计和性能分析,并针对装置的技术难点,提出了解决途径。 A new method called EDM with USM in inverted layout is proposed, which solves the machining difficulty of big aspect ratio of micro holes. Based on experimental equipment and machining experiments, a improved machining equipment based on the vibrating of workpiece is designed, which is EDM with USM machining equipment in inverted layout. The concept design, functional compo- nents design and performance analysis of the equipment are accomplished, and solutions for the techni- cal difficulties are proposed.
出处 《电加工与模具》 2010年第4期64-67,共4页 Electromachining & Mould
基金 山东省自然科学基金资助项目(Y2007F09)
关键词 倒置式 深微孔 电火花加工 加工装置 inverted layout deep micro-hole EDM machining equipment
  • 相关文献

参考文献7

二级参考文献20

  • 1张祖军,陈奎儒,刘继光,黄兴无.深小孔特种加工[J].机械工程与自动化,2004(6):20-22. 被引量:11
  • 2明平美,胡洋洋,朱健.微细电火花加工MEMS器件技术关键分析[J].微纳电子技术,2005,42(4):157-163. 被引量:5
  • 3苏达士,李丹峰.推广超声—放电复合加工方法的几个关键问题[J].韶关学院学报,2005,26(9):45-47. 被引量:2
  • 4徐伟,陈吉红.微细电火花加工实现条件的研究[J].机床与液压,2007,35(4):88-91. 被引量:4
  • 5Naotake Mohri, Hiromichi Morita, Nagao Saito. Development of an electrical discharge drilling device by using a new method for direct drive of electrode[J]. Journal of the Japan Society of Precision Engineering, 1992, 58(12): 2063-2068.
  • 6Katsushi Furutani, Naotake Mohri, Toshiro Higuchi. Direct drive mechanism of EDM electrode utilizing elliptical movement[J]. Journal of the Japan Society for Precision Engineering, 1995, 61 (5): 672-676.
  • 7Katsushi Furutani, Naotake Mohri, Toshiro Higuchi. Self-running electrical discharge machine by using impact drive mechanism[J]. Journal of the Japan Society for Precision Engineering, 1997, 63(9): 1290-1294.
  • 8Naotske Mohri, Katsushi Furutani, Kazubisa Shirai, et al. Forced discharge dispersion by dot matrix method[J]. Annals of the CIRP, 1997, 46(1): 139-142.
  • 9Yong Li, Min Guo, Zhaoying Zhou, et al. Micro electro discharge machine with an inchworm type of micro feed Mechanism[J]. Journal of the International Societies for Precision Engineering and Nanotechnology, 2002, 26: 7-14.
  • 10Masuzawa T, Fujino M, Kobayashi K, et al. Wire electro-discharge grinding for micro-machining[J]. Annals of the CIRP, 1985, 34(1): 431-434.

共引文献14

同被引文献15

引证文献4

二级引证文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部