期刊文献+

串联隔震体系静力性能有限元分析 被引量:4

Finite-element Analyze Static Performance of Series Seismic Isolation System
下载PDF
导出
摘要 采用ANSYS对叠层橡胶支座及与悬臂柱构成的串联隔震体系进行模拟分析,介绍了建立模型的过程,给出了参数设置。对叠层橡胶支座基本力学性能模拟,得到在受压时和受压剪时橡胶与钢板的等效应力分布;对悬臂柱不同截面尺寸两种串联体系进行压剪模拟,得到荷载与位移曲线。通过对比分析叠层橡胶支座基本力学性能结果,得到橡胶支座压缩与剪切最大应力点与破坏机理;通过对串联体系的模拟分析,得出了悬臂柱刚度不同时串联体系水平恢复力的变化情况和造成这种变化的原因。 Laminated rubber isolator and series system is analyzed by finite element analysis software ANSYS in this paper.The process of model and parameters setting are introduced.Through the laminated rubber bearings basic mechanics performance simulation,the equivalent stress distribution of rubber and steel plate is derived;Through the cantilever column different sectional dimensions two series system pressure cutting simulation,the load and displacement curve is derived.It is obtained the maximum shear point and failure mechanism of laminated rubber bearings by the basic mechanics performance results.The series system simulation analysis shows that when columns cantilever stiffness are different,the restoring force of series system is changed,and the reason of the change is derived.
出处 《工程抗震与加固改造》 北大核心 2010年第4期26-31,共6页 Earthquake Resistant Engineering and Retrofitting
基金 国家自然科学基金(50778087)
关键词 叠层橡胶支座 串联隔震体系 转角 分析 laminated rubber isolator series seismic isolation system rotation angle analysis
  • 相关文献

参考文献6

二级参考文献26

共引文献298

同被引文献28

  • 1李慧,姚云龙,杜永峰,党育,韩建平.叠层橡胶支座与柱串联体系动力失稳特性探讨[J].世界地震工程,2005,21(1):18-23. 被引量:12
  • 2GB50011-2010,建筑抗震设计规范[S].
  • 3Haringx J A. "On Highly Compressible Helical Springs and Rubber Rods and Their Application for Vibration- free Mountings(Ⅰ)". Philips Res. Rep., 1948,3, 401-449.
  • 4Stanton J F, Scroggins G, Taylor A W and Roeder C W. Stability of Laminated Elastomeric Bearings [ J ]. J. Engrg. Mech., ASCE,1990,116(6):1351 -1371.
  • 5Masao Iizuka. A Macroscopic Model for Predicting Large-deformation Behaviors of Laminated Rubber Bearing [ J ]. Engineering Structures, 2000,22 : 323 - 334.
  • 6Haringx J A.On Highly Compressible Helical Springs and RubberRods and Their Application for Vibration-Free Mountings[R].I.Philips Res.Rep.1948,3:401-449.
  • 7Koh C G,Kelly J M.Effects of Axial Load on Elastomeric Bearings[R].Berkeley:UCB/EERC-86/12,Earthquake EngineeringResearch Center,University of California,1986.
  • 8Nagarajaiah S,Ferrell K.Stability of Elastomeric Seismic IsolationBearings[J].Journal of Structural Engineering,ASCE,1999,125(9):946-954.
  • 9Buckle I G,Liu H.Experimental Determination of Critical Loadsof Elastomeric Isolators at High Shear Strain[J].NCEERBulletin,1994,8(3):1-5.
  • 10Wilson SJ, Leone BA, Anderson D, et al. Immunohistochemical analysis of the activation of NF-kappaB and expression of associated cytokines and adhesion molecules in human models of allergic inflammation[J]. J Pathol, 1999,189:265-272.

引证文献4

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部