期刊文献+

STUDY ON FLOW STRESS OF 7022 ALUMINUM ALLOY SHEET UNDER DIFFERENT TEMPERATURES AND STRAIN RATES 被引量:7

不同温度和应变速率下7022铝合金流变应力行为(英文)
下载PDF
导出
摘要 Warm tensile tests for aluminum alloy 7022 sheet are held at different temperatures and strain rates. The range of temperature is 293-773 K and that of the strain rate is 0. 001-0.1 s^-1. The warm tensile properties,relations among temperature,strain rate,and the flow stress are discussed. Constitutive equations under the warm tension are obtained based on revised Hooke law and Grosman equation. It is concluded that flow stress declines with the increase of the temperature and the decrease of the strain rates. The elongation percentage increases with the increase of the temperature and the decrease of strain rate. 通过在293—773K的温度范围内和应变速率为0.001—0.1 s-1下对7022铝合金薄板进行温拉伸试验,研究了7022铝合金温拉伸性能,以及该合金在升温条件下流变应力与变形温度和应变速率之间的关系。并利用改进了的Hooke law和Grosman方程建立了7022铝合金在温拉伸时应力-应变本构模型。研究结果表明:7022铝合金的流变应力随温度的升高而降低,随应变速率的升高而升高;温拉伸试样的延伸率随变形温度的升高而升高,随应变速率的增大而减小。
出处 《Transactions of Nanjing University of Aeronautics and Astronautics》 EI 2010年第3期248-254,共7页 南京航空航天大学学报(英文版)
基金 Supported by the National Natural Science Foundation of China (50772095) the Graduate Innovation Foundation of Jiangsu Province (CX09B-073Z)~~
关键词 constitutive equations plastic flow ELASTIC-PLASTIC warm tension 7022 aluminum alloy 本构方程 塑性流动 弹塑性 温拉伸 7022铝合金
  • 相关文献

参考文献12

  • 1蔡一鸣,李慧中,梁霄鹏,汤国建.7039铝合金高温的热变形行为[J].中国有色金属学报,2008,18(10):1775-1780. 被引量:31
  • 2杨长勇,徐九华,丁文锋,付建峰,傅玉灿.EFFECTS OF RARE EARTH ELEMENT LANTHANUM ON MICROSTRUCTURE AND PROPERTIES OF Ag-Cu-Ti SOLDER ALLOY[J].Transactions of Nanjing University of Aeronautics and Astronautics,2008,25(3):230-234. 被引量:4
  • 3Dongun Kim,Harsha Badarinarayan,Ill Ryu,Ji Hoon Kim,Chongmin Kim,Kazutaka Okamoto,R. H. Wagoner,Kwansoo Chung.Numerical simulation of friction stir welding process[J]. International Journal of Material Forming . 2009 (1)
  • 4Cavalierea P,Squillace A,Panella F.Effect of welding parameters on mechanical and microstruc- tural properties of AA6082 joints produced by fric- tion stir welding. Journal of Materials . 2008
  • 5Cavaliere P,De Santis A,Panella F, et al.Effect of welding parameters on mechanical and microstruc- tural properties of dissimilar AA6082—AA2024 joints produced by friction stir welding. Materials and Design . 2009
  • 6Rodrigues D M,Loureiro A,Leitao C, et al.Influ- ence of friction stir welding parameters on the mi- crostructural and mechanical properties of AA 6016- T4 thin welds. Materials and Design . 2009
  • 7Carter Hamilton,Stanis/law Dymek,Marek Blichars- ki.A model of material flow during friction stir welding. Materials Characterization . 2008
  • 8Gronostajski Z.The constitutive equations for FEM analysis. Journal of Materials . 2000
  • 9M Jariyaboon,A J Davenport, etc.The effect of welding paraments on thecorrosion behavior of friction stir welded AA2024-T351. Corrosion Science . 2007
  • 10Teusuo Naka,Fusahito Yoshi Da.Deep Drawability of type 5083 Aluminium- magnesiun Alloy Sheet under Various Conditions of temperature and Forming Speed. Journal of Materials Processing Technology . 1999

二级参考文献16

共引文献33

同被引文献48

  • 1赵永庆,奚正平,曲恒磊.我国航空用钛合金材料研究现状[J].航空材料学报,2003,23(z1):215-219. 被引量:126
  • 2李梁,孙健科,孟祥军.钛合金的应用现状及发展前景[J].钛工业进展,2004,21(5):19-24. 被引量:219
  • 3郭鸿镇,张维,赵张龙,姚泽坤,虢迎光,王保善,赵永庆,曲恒磊.TC21新型钛合金的超塑性拉伸行为及组织演化[J].稀有金属材料与工程,2005,34(12):1935-1939. 被引量:30
  • 4刘慧敏,呼努斯图,由国艳.原位反应喷射沉积7075铝合金的塑性变形机理[J].材料工程,2007,35(9):58-61. 被引量:2
  • 5Khorrami M S, Kazeminezhad M, Kokabi A H. Mechanical properties of severely plastic deformed aluminum sheets joined by friction stir welding [J]. Materials Science and Engineering A,2012,543:243-248.
  • 6Yan D Y, Wu A P, Slivanus J, et al. Predicting residual distortion of aluminum alloy stiffened sheet after friction stir welding by numerical simulation [J]. Materials and Design, 2011,32 : 2284-2291.
  • 7Palanivel P, Mathews P K, Murugan N, et al. Effect of tool rotational speed and pin profile on microstructure and tensile strength of dissimilar friction stir welded AA5083-H111 and AA6351-T6 aluminum alloys [J]. Materials and Design,2012, 40:7-16.
  • 8Rajakumar S, Balasubramanian V. Establishing relationships between mechanical properties of aluminum alloys and optimized friction stir welding process parameters[J]. Materials and Design,2012,40 : 17-35.
  • 9Metz D F, Barkey M E. Fatigue behavior of friction plug welds in 2195 AI-Li alloy[J]. International Journal of Fatigue, 2012,43 : 178-187.
  • 10Guo J, Gougeon P, Chert X G. Microstructure evolution and mechanical properties of dissimilar friction stir welded joints between AAII00-B4C MMC and AA6063 alloy[J]. Materials Science and Engineering A,2012,553:149-156.

引证文献7

二级引证文献20

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部