期刊文献+

Effect of solidification parameters on the microstructures of a single crystal Ni-based superalloy AM3 被引量:4

Effect of solidification parameters on the microstructures of a single crystal Ni-based superalloy AM3
下载PDF
导出
摘要 A single crystal Ni-based superalloy AM3 was processed at withdraw rates of 3.5, 10, 50, 100, 200, and 500 μm·s-1, respectively.The as-cast microstructures and solidification segregation ratio were characterized with various withdraw rates.The shape and size of carbide microstructures were determined.As expected, the primary and secondary dendrite arm spacings (PDAS and SDAS) decrease with the increase of withdraw rate.The highest volume fraction of eutectic γ/γ' is observed at the 100 μm·s-1 withdraw rate.The volume fraction of eutectic γ/γ' does not appear to be a strong function of the withdraw rate.With increasing withdraw rate, interface morphologies change in the sequence of planar, cellular, and dendrite.There is a general refinement of the microstructure as the withdraw rate increases.EPMA analysis showed that withdraw rate does not have obvious influence on the segregation of elements. A single crystal Ni-based superalloy AM3 was processed at withdraw rates of 3.5, 10, 50, 100, 200, and 500 μm·s-1, respectively.The as-cast microstructures and solidification segregation ratio were characterized with various withdraw rates.The shape and size of carbide microstructures were determined.As expected, the primary and secondary dendrite arm spacings (PDAS and SDAS) decrease with the increase of withdraw rate.The highest volume fraction of eutectic γ/γ' is observed at the 100 μm·s-1 withdraw rate.The volume fraction of eutectic γ/γ' does not appear to be a strong function of the withdraw rate.With increasing withdraw rate, interface morphologies change in the sequence of planar, cellular, and dendrite.There is a general refinement of the microstructure as the withdraw rate increases.EPMA analysis showed that withdraw rate does not have obvious influence on the segregation of elements.
出处 《China Foundry》 SCIE CAS 2010年第3期217-223,共7页 中国铸造(英文版)
基金 supported by the National Natural Science Foundation of China (Grant No.50771081,50931004) the National Basic Research Program of China (2010CB631202)
关键词 Ni-based superalloy single crystal withdraw rate solidi fi cation PDAS SDAS Ni-based superalloy single crystal withdraw rate solidification PDAS SDAS
  • 相关文献

参考文献27

  • 1Davis J R (Ed).Heat Resistant Materials -ASM Specialty Handbook,ASM International,Materials Park,OH,1997:255-261.
  • 2Davis J R(Ed).Heat Resistant Materials -ASM Specialty Handbook,ASM International,Materials Park,OH,1997:290-298.
  • 3Gell M,Duhl D N,Giame A F.The development of single crystal superalloy turbine blades.Superalloys 1980,TMS,1980:204-208.
  • 4Durand-Charee M.The microstructure of superalloys.Gordon and Breach Science Publishers,Canada,1997:60-67.
  • 5Liu L,Huang T W,Zhang J,Fu H Z.Microstructure and stress rupture properties of single crystal superalloy CMSX-2 under high thermal gradient directional solidification.Materials Letters,2007,61(1):227-230.
  • 6Lohmueller L,Esser W,Grossmann J,et al.Improved quality and economics of investment castings by liquid metal coilingthe selection of cooling media.Superalloys 2000,TMS,2000:181-188.
  • 7Elliott A J,Tin S,King W T,et al.Issues in processing by the liquid-Sn assisted directional solidification technique.Superalloys 2004,TMS,2004:421-430.
  • 8Konter M,Kats E,Hofmann N.A model casting process for single crystal gas turbine components.Superalloys 2000,TMS,2000:189-200.
  • 9Li L and Overfelt R A.Influence of directional solidification variables on the cellular and pdmary dendrite arm spacings of PWA 1484.J.Mater.Sci.,2002,37:3521-3532.
  • 10Liu Lin,Huang Taiwen,Qu Min.High thermal gradient directional solidification and its application in the processing of nickelbased superalloys.Journal of Materials Processing Technology,2010,210:159-165.

同被引文献6

引证文献4

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部