期刊文献+

整体中空夹层复合材料芯材倾角与平压性能关系的研究 被引量:4

THE CORE ANGLE OF INTEGRATED HOLLOW CORE SANDWICH COMPOSITE PANELS WITH FLATWISE COMPRESSION
下载PDF
导出
摘要 整体中空夹层复合材料作为一种新型结构的三维机织复合材料,有着广阔的应用前景。本文选取了同一规格的"8"字型中空织物,对其进行复合,根据芯材倾角不同,选取了5种不同倾角的试样件进行平压性能测试。结果表明,相同规格的复合材料的抗压性能和弹性模量均随芯材倾角θ的减小而减小,且当θ<(70±3)°时,材料的抗压性能大幅度下降;另外,芯材的破坏形式与倾角θ有密切关系,θ在(70±3)°以下时的曲线形态与其在(70±3)°以上时的曲线形态有着明显差异。 As a kind of three-dimensional structure of the new woven composites,integrated hollow core sandwich composite panels have broad prospects."8" shape hollow fabrics with same specification had been chosen in this paper,which were consolidated with epoxy resin.Based on different core angles,the paper selected five kinds of specimens and tested their flatwise compression.The results show that,with core angles increasing,the compressive properties and flexibility modulus of composites rise.The damage forms of the core have close relationship with core angle "θ".The curve shape shows obvious difference between θ below and over(70±3)°.
出处 《玻璃钢/复合材料》 CAS CSCD 2010年第6期3-5,共3页 Fiber Reinforced Plastics/Composites
关键词 整体中空 芯材倾角 压缩性能 hollow integrated core angles flatwise compression
  • 相关文献

参考文献9

二级参考文献53

共引文献146

同被引文献23

  • 1徐颖,温卫东,崔海坡.复合材料层合板低速冲击逐渐累积损伤预测方法[J].材料科学与工程学报,2006,24(1):77-81. 被引量:28
  • 2杨果,潘勤彦,潘皖江,付绍云.柔性胺改性剂对环氧树脂力学性能的影响[J].材料工程,2006,34(5):16-20. 被引量:24
  • 3祝成炎,陈俊俊,朱俊萍,谭冬宜,徐国平.三维整体夹芯织物增强复合材料的研制[J].纺织学报,2007,28(1):56-59. 被引量:12
  • 4周光明,钟志珊,张立泉,匡宁.整体中空夹层复合材料力学性能的实验研究[J].南京航空航天大学学报,2007,39(1):11-15. 被引量:35
  • 5全国纤维增强塑料标准化技术委员会.GB/T1453-2005夹层结构或芯子平压性能试验方法[S].北京:中国标准出版社,2005.
  • 6Li Min, Wang Shaokai, Zhang Zuoguang, et al. Effect of structure on the mechanical behaviors of three-dimensional spacer fabric composites[J]. Applied Composite Materials, 2009, 16(1):1-14.
  • 7Hosur MV, Abdullah M, Jeelani S. Manufacturing and low- velocity impact characterization o[ hollow integrated core sandwich composites with hybrid face sheets [J]. Composite Structures, 2004, 65 (1)- 103-115.
  • 8全国纤维增强塑料标准化技术委员会.GB/T14532005夹层结构或芯子平压性能试验方法[s].北京:中国标准出版社,2005.
  • 9全国纤维增强塑料标准化技术委员会.GB/T1456-2005夹层结构弯曲性能试验方法[s].北京:中国标准出版社,2005.
  • 10Hosur M V, Abdullah M, Jeelani S. Manufacturing and low-velocity impact characterization of hollow integrated core sandwich composites with hybrid face sheets [ J ]. Composite Structures ,2004,65 ( 1 ) : 103-115.

引证文献4

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部