期刊文献+

TP304H锅炉管运行泄漏原因分析 被引量:5

Failure Analysis of TP304H Tubes Operating in Power Station Boilers
原文传递
导出
摘要 通过裂纹宏观形貌、显微组织、力学性能等分析,研究了1021 t/h锅炉用TP304H屏式过热器夹持管弯头高温运行62000 h泄漏原因.结果表明,在高温运行敏化温度下,冷加工成型TP304H弯管腐蚀敏感性增强,弯管内外部存在腐蚀介质,长期运行过程中,在运行管内蒸汽应力、热应力以及管排振动、锅炉启停等产生的交变应力作用下,产生应力腐蚀.蒸汽侧应力腐蚀是造成泄漏的主要原因. Fracture analysis of bend TP304H tube on pendant-heater operated on super-heater for 62000 hours in a 1021 t/h boiler was carried out by means of examinations such as macro- morphology of crack, mechanical property and metallographic of tube steel. The results showed that the corrosion cracking resistance of the TP304H steel tube was degraded due to the existing residual stress brought by original cold-forming process and also due to the operation temperatures of tubes which were just around the sensitivation temperature of the steel. Besides the ash deposits on the surface of tubes and inner corrosive environment all accelerated the corrosion of the tubes. It is expected that large tensile stress such as operating thermal stress and alternating stress of start-up and lay-up of boiler may existe at the bend tube. All the above factors may induce intergranular corrosion cracking of the tube for long operation time. It follows that the steam side stress corrosion cracking may be mainly responsible for the failure of tubes for the pendant-heater.
出处 《腐蚀科学与防护技术》 CAS CSCD 北大核心 2010年第6期551-554,共4页 Corrosion Science and Protection Technology
关键词 TP304H 冷加工成型 晶间腐蚀 应力腐蚀裂纹 奥氏体不锈钢 TP304H steel, cold forming, intercrystalline corrosion, stress-corrosion cracks, austenitic stainless steel
  • 相关文献

参考文献8

二级参考文献28

共引文献83

同被引文献40

引证文献5

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部