期刊文献+

Q345B钢板坯角部横裂纹成因分析 被引量:3

Analysis on Causes of Corner Transverse Cracks Formation for Q345B Slab
下载PDF
导出
摘要 用金相显微镜、扫描电镜和能谱仪分析了某钢厂Q345B钢板坯角部横裂纹的特征和成因。结果表明:裂纹是由沿奥氏体晶界析出的MnS复合析出物和先共析铁素体膜造成的。铸坯凝固过程中,微细硫化锰沿奥氏体晶界析出,当铸坯表面温度降低到奥氏体向铁素体转变温度范围时,微细硫化物促进膜状先共析铁素体的形成,受到矫直应力作用时,应力主要集中在膜状铁素体相上,并在硫化物周围形成微孔,微孔聚合导致裂纹的形成。 Features and causes of corner transverse cracks for Q345B slab were analyzed based on metallographic microscopy,scanning electron microscopy and energy dispersion scanner.The results shows that the causes of forming cracks are the chain-like manganese sulfide compound and the film-like proeutectoid ferrite precipitated surrounding the austenite grain boundaries.The fine MnS precipitated along the austenite grains boundaries during slab solidification,then further accelerated the formation of thin films proeutectoid ferrite when the temperature of the slab surface droped to the austenite–ferrite transformation temperature range.When the slab was subject to straightening stress,all the strain mainly concentrates in these thin films,encouraging the formation of micropore around the MnS boundaries and these micropore polymerization gradually results in the formation of the crakes.
出处 《钢铁钒钛》 CAS 北大核心 2010年第4期56-61,共6页 Iron Steel Vanadium Titanium
关键词 连铸 微观组织 横裂纹 析出物 continuous casting microstructures transverse crack precipitates
  • 相关文献

参考文献11

  • 1Mintz B. The influence of composition on the hot ductility of steels and to the problem of transverse cracking[J]. ISIJ International, 1999, 39 (9): 833-855.
  • 2Zarandi F, Yue S. Failure mode analysis and a mechanism for hot-ductility improvement in the Nb-microalloyed steel[ J ]. Metallurgical and Materials Transaction A,2004(35) :3823 -3841.
  • 3Harada S, Tanaka S, Misumi H, et al. A formation mechanism of transverse cracks on CC slab surface. [ J ] . ISIJ International, 1990, 30 (4):310-316.
  • 4Dippenaar R, Moon S C, Szckeres E S. Strand surface crakes:the role of abnormal large prior-austenite grains[ J ]. Iron & Steel Technology,2007,4:105 - 115.
  • 5孙彦辉,赵长亮,蔡开科,杨素波,陈永,李桂军,顾武安.连铸板坯表层网状裂纹的成因研究[J].中国冶金,2008,18(4):15-20. 被引量:15
  • 6Mintz B. Understanding the low temperature end of the hot ductility trough in steels [ J ]. Materials Science and Technology, 2008,24(1) :112 - 120.
  • 7Maehara Y, Yasumtot K, Sugitani Y. Effect of carbon on hot ductility of as-cast low alloy steel[J]. Testu- to- Hagane,1985 ( 1 1 ) : 1534 - 1541.
  • 8Takamura J, Mizoguchi S. Roles of oxides in steels performance[ C] // Proc Sixth Int Iron and Steel Congress. Nagoya: ISIJ, 1990:591 - 596.
  • 9刘新宇,许中波,王新华,杜德信,赵克文,伍兵.含钒微合金钢连铸坯高温塑性的研究[J].钢铁,2000,35(1):51-54. 被引量:23
  • 10Turkdogan E T, Ignatowicz S, Pearson J. The solubility of sulphur in iron and iron-manganese alloys [ J 1- Iron Steel Inst. , 1955,180:349 - 54.

二级参考文献14

  • 1蔡开科.连铸坯表面裂纹的控制[J].鞍钢技术,2004(3):1-8. 被引量:106
  • 2[2]Mintz.The Influence of Composition on the Hot Ductility of Steels and to the Problem of Transverse Cracking[J].ISIJ international,1999,39(9)1833.
  • 3[5]Pradhan N.Banerjee N,Reddy B B.Control of Transverse Cracking in Special Quality Slabs[J].Ironmaking and Steelmaking,2001,28(4):305.
  • 4[6]Yasumoto.K.Effects of Sulphur on Hot Ductility of Low Carbon Steel[J].Materails Science and Technology,1985,2(1):111.
  • 5[7]Wilson F G,Gladman T G.Aluninium Nitride in Steel[J].International Material Review,1988,33(5):221.
  • 6[8]Mintz B.Influence of Nitrogen on Hot Ductility of Steels and Its Relationship to Problem of Transverse Cracking[J].Ironmaking and Steelmaking,2000,27(5):343.
  • 7[9]Chiaki OUCHI,Kazuaki MATSUMOTO.Hot Ductility in Nb-Beailng High-Strength Low-Alloy Steels[J].Transactions ISIJ,1982,22:181.
  • 8[11]Mintz B.Nfluence of Nitrogen on Hot Ductility of Steels and Its Relationship to Problem of Transverse Cracking[J].Ironmaking and Steelmaking,2000,27(5):343.
  • 9[12]Turkdogan E T.Causes and Effects of Nitride and Carbonitilde Precipitation in HSLA Steels in Relation to Continuous Casting[A].70th Steelmaking Conference Proceedings.Pittsburgh,US,Iron and Steel Society Inc.,1987,70:399.
  • 10王新华,昌波,李景捷,张立,叶锦渭.700-1000℃间含Nb钢铸坯的延塑性降低与Nb(C,N)析出[J].金属学报,1997,33(5):485-491. 被引量:47

共引文献35

同被引文献25

引证文献3

二级引证文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部