期刊文献+

Durability characteristics of cement-bonded particleboards manufactured from maize stalk residue 被引量:1

Durability characteristics of cement-bonded particleboards manufactured from maize stalk residue
下载PDF
导出
摘要 Cement-bonded particleboards of 6 mm in thickness were manufactured using maize stalk (Zea mays) particles of uniform sizes at three levels of board density and additive concentrations respectively. The bending strength and dimensional properties were assessed. Increase in board density and additive concentration caused increase in Modulus of rupture (MOR), Modulus of elasticity (MOE), and decrease in Thickness swelling (TS) and Water absorption (WA). The MOR, MOE and TS of the boards were significantly affected by board density except for WA, but additive concentration affected all the boards' properties examined at p ≥ 0.05. Strong and dimensional stable cement-bonded boards could be manufactured from maize stalk particles with Portland cement as the binder after hot water treatment. Although the dimensional stability and mechanical strength properties of the boards were affected by the board density and additive concentration, the study revealed that cement-bonded particleboards could be manufactured from maize stalk (Zea mays) particles. However, the increase in board density and additive concentration could cause the increase in MOR and MOE, and cause the decrease in TS and WA of boards. Cement-bonded particleboards of 6 mm in thickness were manufactured using maize stalk (Zea mays) particles of uniform sizes at three levels of board density and additive concentrations respectively. The bending strength and dimensional properties were assessed. Increase in board density and additive concentration caused increase in Modulus of rupture (MOR), Modulus of elasticity (MOE), and decrease in Thickness swelling (TS) and Water absorption (WA). The MOR, MOE and TS of the boards were significantly affected by board density except for WA, but additive concentration affected all the boards' properties examined at p ≥ 0.05. Strong and dimensional stable cement-bonded boards could be manufactured from maize stalk particles with Portland cement as the binder after hot water treatment. Although the dimensional stability and mechanical strength properties of the boards were affected by the board density and additive concentration, the study revealed that cement-bonded particleboards could be manufactured from maize stalk (Zea mays) particles. However, the increase in board density and additive concentration could cause the increase in MOR and MOE, and cause the decrease in TS and WA of boards.
出处 《Journal of Forestry Research》 SCIE CAS CSCD 2011年第1期111-115,共5页 林业研究(英文版)
关键词 raw materials strength properties analysis of variance dimensional changes PARTICLEBOARDS raw materials strength properties analysis of variance dimensional changes particleboards
  • 相关文献

参考文献20

  • 1Ajayi B.2000.Strength and dimensional stability of cement-bonded flake-board produced from Gmelina arborea and Leucaena leucocephala Un-published Ph.D.Thesis,Federal University of Technology,Department of Forestry and Wood Technology,Akure,Nigeria.176.
  • 2Ajayi B.1993.A review of international standard methodology of accelerat-ed aging test in particleboard.The Nigerian Journal of Forestry,23(2):71–74.
  • 3Ajayi B,Badejo SOO.2005.Effects of board density on Bending Strength and internal bond of cement-bonded Flakeboards.Journal of Tropical For-est Science,17(2):228–234.
  • 4Ajayi B.2003.Assessment of the dimensional stability of cement–bonded particleboard from post-harvest banana stem residues and sawdust.World Forestry Congress,at Quebec City,Canada.Vol.A:157.
  • 5Ajayi B.2003.Investigation of the dimensional stability of cement-bonded composite boards fabricated from Coffee Husks,The Nigerian Journal of Forestry,33(2):88–93.
  • 6Ajayi B.2003.Short term performance of cement-bonded hardwood flake boards.Journal of Sustainable Tropical Agricultural Research,8:16–19.
  • 7Ajayi B.2008.The dimensional stability and strength properties of inor-ganic-bonded particleboards made from eupatorium odorata particles.62nd Forest Products Society Conference.St Louis,Missouri,USA.Book of Bi-ographies and Abstracts.pp 27.
  • 8American Society for Testing and Materials.1978."Standard Methods of Evaluating the Properties of Wood based fibre and particle Panel Materials" ASTM Desig.D1037–1078.Philadelphia Pennsylvania.
  • 9Badejo SOO.1999.Influence of process variables on properties of cement-bonded particleboards from mixed tropical hardwoods.PhD Thesis,Federal University of Technology,Department of Forestry and Wood Technology,Akure,Nigeria,255pp.
  • 10Central Bank of Nigeria.2004.Statistical Bulletin.Vol.15.Central bank of Nigeria,Abuja,Nigeria.392p.

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部