期刊文献+

不同基底材料与饰面瓷结合力实验研究 被引量:4

Experimental study of the bonding strength of different base materials and veneering porcelain
原文传递
导出
摘要 目的比较不同基底材料与饰面瓷的结合力,为修复临床选择不同的瓷修复体提出依据。方法 2009年11月至2010年5月在大连市口腔医院应用特制模具制作基底材料标本蜡型(直径6mm,高8mm)共60个。根据各基底材料制作要求分别制作镍铬(Ni-Cr)合金、钴铬(Co-Cr)合金、金钯(Au-Pd)合金、混合Au-Pd合金、压铸瓷及氧化锆基底材料标本(每组10个)。在实验标本的一端堆瓷,瓷层总厚度控制在(2.0±0.01)mm。在万能试验机上以0.5mm/min的加载速度进行加载至剪切断裂。对实验标本的剪切强度进行单因素方差分析。结果 6种瓷修复体的的剪切强度为:Au-Pd合金组(51.56±8.93)MPa,Ni-Cr合金组(45.61±3.11)MPa,Co-Cr合金组(37.12±4.08)MPa,混合金钯合金组(36.07±5.42)MPa,氧化锆组(31.52±7.45)MPa,压铸瓷组(29.62±9.97)MPa。单因素方差分析表明不同金属合金基底材料与饰面瓷间的剪切强度差异有统计学意义(P<0.01)。结论不同基底材料与饰面瓷的剪切强度存在差异。Au-Pd合金和Ni-Cr合金与饰面瓷结合力强。 Objective To compare the shear bond strength of different base materials and veneering porcelain,and to propose basis for clinical rehabilitation choices of different ceramic restoration.Methods A special mold was used for preparation of the wax pattern of base specimens,60 in total.Cylindrical base specimens,8 mm high and 6mm in diameter,were fabricated according to the manufacturer's instructions,including Ni-Cr alloy,Co-Cr alloy,Au-Pd alloy,mixed Au-Pd alloy,casting ceramic and zirconia(n=10).The thickness of veneer ceramics was(2.0±0.01)mm over the transverse section of base specimens,and sintering strictly according to the manufacturer's recommended procedures.The shear tests were performed in a universal testing machine at a cross-head speed of 0.5 mm/min,and the shear bond strength was recorded.The experimental data of shear bond strength were analyzed by One-way ANOVA.Results The mean shear bond strength was:(51.56±8.93)MPa(Au-Pd alloy),(45.61±3.11)MPa(Ni-Cr alloy),(37.12±4.08)MPa(Co-Cr alloy),(36.07± 5.42)MPa(mixed precious group),(31.52±7.45)MPa(zirconia),and(29.62±9.97)MPa(casting ceramic).Results of One-way ANOVA showed that there were significant differences between ceramic/alloy combination tested(P 0.001).Conclusion The results of this study indicate that the shear bond strength of different base materials and veneering porcelain are different.Porcelain fused to Au-Pd alloy and Ni-Cr alloy show maximum bonding strength.
出处 《中国实用口腔科杂志》 CAS 2011年第1期33-35,38,共4页 Chinese Journal of Practical Stomatology
基金 辽宁省自然科学基金项目(20072149)
关键词 陶瓷 基底合金 剪切强度 金瓷界面 ceramic base alloy shear bond strength metal-ceramic interface
  • 相关文献

参考文献14

  • 1Hammad IA.Talk YF.Designs of bond strength teats for metal-ceramic complexes:review of the literature[J].J Prosthet Dent,1996,75(6):602-608.
  • 2陈治清.口腔材料学[M].3版.北京:人民卫生出版社,2005:42.
  • 3O'Connor RP,Macker JR,Myers ML,et al.Castability,opaque mssking,and porcelain bonding of 17 porcelain-fused-to-metal alloys[J].J Prosthet Dent,1996,75(4):367-374.
  • 4Craig RG,Ward ML.Restorative dental materials[M].10th ed.St.Louis:Mosby-Year Book,1997:484-499.
  • 5Wataha JC.Alloys for prosthodontic restorations[J].J Prosthet Dent,2002,87(4):351-363.
  • 6VonRadnoth MS,Lautenschlager EP.Metal surface changes during porcelain firing[J].J Dent Res,1969,48(2):321-324.
  • 7桑田正博.金属瓷修复体的理论与实践[M].天津:天津科学技术出版社,1984:8.
  • 8Riley EJ.Ceramo-metal restoration.State of the science[J].Dent Clin Noah Am,1977,21(4):669-682.
  • 9Anusavice KJ.Phillips'science of dental materials[J].11th ed.Philadelphia:Saunders,2003:562-563,621-654.
  • 10Ayad MF.Compositional stability and marginal accuracy of complete cast crowng made with as-received and recast type Ⅲ gold alloy[J].J Prosthet Dent,2002,87(2):162-166.

二级参考文献4

共引文献13

同被引文献42

  • 1张钊,陈树国,李雅娟,董福生,郭长军,孟令强.烧结次数对金瓷冠微观结构的影响[J].现代口腔医学杂志,2004,18(4):317-319. 被引量:10
  • 2舒成军,骆小平,邬烈.表面处理对两种钛瓷粉的钛瓷结合力的影响[J].口腔医学研究,2007,23(5):505-508. 被引量:10
  • 3Guazzato M, Albakry M, Ringer S P, et al. Strength, frac- ture toughness and microstructure of a selection of all-ce- ramic materials. Part II. Zirconia-based dental ceramics[J]. Dent Mater, 2004, 20(5): 449-456.
  • 4Sailer I, Feher A, Filser F, et al. Five-year clinical results of zirconia frameworks for posterior fixed partial dentures[J]. Int J Prosthodont, 2007, 20(4).. 383-388.
  • 5Sailer I, Feher A, Filser F, et al. Prospective clinical study of zirconia posterior fixed partial dentures: 3-year follow-up [J]. Quintessence Int, 2006, 37(9): 685-693.
  • 6全国口腔材料和器械设备标准化技术委员会.医药行业标准YY0716-2009:牙科陶瓷[S].国家食品药品监督管理局,2009.
  • 7Lughi V, Sergo V. Low temperature degradation -aging- of zirconia: A critical review of the relevant aspects in dentistry [J]. DentMater, 2010, 26(8)= 807-820.
  • 8Christensen G J. In-office CAD/CAM milling of restora- tions: the future?[J]. J Am Dent Assoc, 2008, 139(1): 83- 85.
  • 9Nakamura T, Wakabayashi K, Zaima C, et al. Tensile bond strength between tooth-colored porcelain and sandblasted zirconia framework[J]. J Prosthodont Res, 2009, 53 (3): 116-119.
  • 10Fernando Z,Simona R,Roberto S. From porcelain-fused- to-metal to zireonia: Clinical and experimental considera- tions[J].Dental Materials, 2011,27 ( 1 ) :83-96.

引证文献4

二级引证文献16

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部