期刊文献+

基于DSP的开关磁阻电机磁链特性检测与神经网络建模 被引量:22

Flux Linkage Characteristic Measurement Based on DSP and Artificial Neural Network Modeling for Switched Reluctance Motor
下载PDF
导出
摘要 基于实测磁化曲线提出一种开关磁阻电机小波神经网络磁链模型。设计了基于DSP的开关磁阻电机磁链特性检测系统,在上位机中采用离散方法计算磁链值,获得不同角位置下的电机磁化曲线族;利用实测磁链特性建立神经网络模型,选择Mexican hat小波函数作为隐层激励函数,采用下降梯度法对网络进行训练以确定模型参数。仿真结果表明,所提出的开关磁阻电机小波神经网络磁链模型具有较小的误差和较强的泛化能力,对实现开关磁阻电机在线优化控制具有实际意义。 A wavelet neural network(WNN) model of flux linkage characteristic based on measured magnetization curves is presented for switched reluctance motors(SRM).A flux linkage measuring installation is setup by using a digital signal processor(DSP).The magnetization curves at different rotor positions are obtained by calculating flux linkage using a discrete method on an upper level computer.Then,a feed-forward neural network(FFNN) model of flux linkage characteristic is proposed.The commonly used Mexican hat wavelet is chosen as the activation function for hidden-layer neurons,and its parameters are determined by training the network with the descend gradient method.Simulation indicates that the proposed model has reduced error and improved generalization property.It shows some prospect on optimizing online control of SRM.
出处 《电工技术学报》 EI CSCD 北大核心 2011年第2期68-73,共6页 Transactions of China Electrotechnical Society
基金 国家杰出青年科学基金(50825701) 国家自然科学基金重点项目(51037004) 国家自然科学基金(50777044) 天津市应用基础及前沿技术研究计划重点项目(08JCZDJC17600)资助项目
关键词 开关磁阻电机 磁链特性 小波神经网络 DSP TMS320F2812 Switched reluctance motor flux linkage characteristic wavelet neural network DSP TMS320F2812
  • 相关文献

参考文献15

  • 1Xia Changliang, Xue Mei, Chen Ziran. Adaptive PID control and on-line identification for switched reluctance motors based on BP neural network[C]. 2005 IEEE International Conference on Mechatronics and Automation, Canada, 2005, 4:1918-1922.
  • 2夏长亮,王明超,史婷娜,郭培健.基于神经网络的开关磁阻电机无位置传感器控制[J].中国电机工程学报,2005,25(13):123-128. 被引量:70
  • 3Tang Y, Kline J A. Modeling and design optimization of switched reluctance machine by boundary element analysis and simulation[J]. IEEE Transactions on Energy Conversion, 1996, 11(4).. 673-680.
  • 4Parreira B, Rafael S, Pires A J, et al. Obtaining the magnetic characteristics of an 8/6 switched reluctance machine: from FEM analysis to the experimental tests[J]. IEEE Transactions on Industrial Electronics, 2005, 52(6): 1635-1643.
  • 5Krishnan R, Materu P. Measurement and instrumentation of a switched reluctance motor[C] Industry Applications Society Annual Meeting Diego, CA, USA, 1989, 1: 116-121. IEEE San.
  • 6Ray W F, Erfan F. A new method of flux or inductance measurement for switched reluctancemotors[C]. Proceedings of 5th International Conference on Power Electronics and Variable-Speed Drives, London, UK, 1994: 137-140.
  • 7Chancharoensook P, Rahman M F. Magnetization and static torque characterization of a four-phase switched reluctance motor: experimental investigations[C]. Proceedings of International Conference on Power Electronics and Drives Systems(PEDS), Denpasar, Indonesia, 2001, 2: 456-460.
  • 8曹家勇,周祖德,陈幼平,詹琼华.开关磁阻电动机特性检测与参数辨识方法研究[J].电工技术学报,2004,19(11):25-30. 被引量:20
  • 9WangSC, ChenWS, LiaoWB, etal. APC-based measurement system for determining magnetic characteristics of switched reluctance motors[C]. Power Con. 2002, Kunming, China, 2002, 4: 2256- 2260.
  • 10Stephenson J M, Corda J. Computation of torque and current in double salient reluctance motors with nonlinear magnetization data[J]. IEE Proceedings, 1979, 126(5): 393-396.

二级参考文献47

共引文献177

同被引文献210

引证文献22

二级引证文献143

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部