期刊文献+

数控车床主轴部件及其主轴箱热特性有限元分析 被引量:13

Finite Element Analysis of Thermal Characteristics of the Spindle Assembly and Headstock for a Numerical Control Lathe
下载PDF
导出
摘要 以某数控车床主轴箱为对象,研究了主轴箱的热态特性及其对机床性能的影响.在确定有限元分析所需参数的基础上,建立了主轴箱有限元分析模型,仿真计算了主轴箱的稳态温度场分布情况以及主轴箱热平衡时间,并利用热和结构耦合技术仿真计算了主轴箱在热和结构耦合作用下的温度场及热变形,分析确定了主轴部件和主轴箱的热变形趋势.通过分析可知热的不对称将对机床的加工性能产生影响,研究工作为主轴箱的优化设计和热误差补偿奠定了基础. The effect of thermal properties on performance was determined for the headstock of a CNC lathe.Based on the factors needed for finite element analysis(FEA),an FEA model of the headstock was established,with the constant temperature field distribution and thermal equilibrium time of the headstock simulated and calculated.Under conditions of heat and structure load,the temperature field and thermal deformation of the headstock were calculated using a thermal and structure coupling technique,and heat distortion trends of the spindle assembly and headstock were analyzed.Results indicated that hot asymmetry affected machine processing performance and provide a foundation for optimization design of spindle assembly and thermal error compensation.
出处 《东北大学学报(自然科学版)》 EI CAS CSCD 北大核心 2011年第4期571-574,共4页 Journal of Northeastern University(Natural Science)
基金 "十一五"科技重大专项(2009ZX04001-053)
关键词 稳态热分析 瞬态热分析 耦合分析 温度场 有限元分析 constant heat analysis transient thermal analysis coupling analysis temperature field finite element analysis(FEA)
  • 相关文献

参考文献9

  • 1郭策,孙庆鸿,蒋书运,陈南,朱壮瑞,秦绪柏.高速高精度数控车床主轴系统的热特性分析[J].制造技术与机床,2003(3):37-39. 被引量:14
  • 2刘朝华,石秀敏.机床热变形误差补偿技术的研究与应用[J].制造技术与机床,2009(2):34-36. 被引量:6
  • 3Creighton E, Honegger A, Tulsian A, et al. Analysis of thermal errors in a high-speed micro-milling spindle [ J ]. Machine Tools & Manufacture, 2010,50: 386 - 393.
  • 4Yang S H, Kim K H, Park Y K. Measurement of spindle thermal errors in machine tool using hemispherical ball bar test [J]. Machine Tools & Manufacture, 2004,44:333-340.
  • 5Zhao H T, Yang J G, Shen J H. Sinlulation of thermal behavior of a CNC machine tool spindle[J]. Machine Tools & Manufacture, 2007,47 : 1003 - 1010.
  • 6Pahk H J, Lee S W. Thermal error measurement and real time compensation system for the CNC machine tools incorporating the spindle thermal error and the feed axis thermal error[J ]. Advanced Manufacturing Technology, 2002,20 : 487 - 494.
  • 7Chang C F, Chen J J. Themaal growth control techniques for motorized spindles[J]. Mechatronics, 2009,19:1313 - 1320.
  • 8Chen J S, Hsu W Y. Characterizations and models for the thermal growth of a motorized high speed spindle [ J ]. Machine Tools & Manufacture, 2003,43:1163 - 1170.
  • 9Chi W L, Tu J F, Kamman J. An integrated thermomechanical-dynamic modal to characterize motorized machine tool spindles during very high speed rotation [ J ]. Machine Tool & Manufacturing, 2003,43:1035 - 1050.

二级参考文献8

共引文献15

同被引文献73

引证文献13

二级引证文献64

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部