期刊文献+

人造革低温发泡方法研究 被引量:2

Study on the Low Temperature Foaming Method for PVC Artificial Leather Manufacture
原文传递
导出
摘要 采用差示扫描量热法(DSC)研究了几种助发泡剂对PVC(聚氯乙烯)人造革生产过程中常用发泡剂偶氮二甲酰胺(AC)的分解温度、峰宽和焓变的影响。结果显示,在锌类化合物和碳酸氢钠(NaHCO3)的共同作用下,AC的分解温度降低,分解温度区间变宽,发气量均衡,基本满足PVC人造革低温发泡技术要求。 The effects of several additives on decomposition temperature range,peak temperature and enthalpy change of AC foaming agent for PVC(polyvinyl chloride) artificial leather manufacture f(or the AC foaming agent) are investigated in detail by Differential Scanning Calorimeter(DSC).The result showed that the additive which consists of zinc compounds and modified sodium bicarbonate(NaHCO3) can efficiently decrease the decomposition temperature,broaden the interval of decomposition temperature and balance the gas evolution of AC foaming agent.
出处 《皮革科学与工程》 CAS 北大核心 2011年第2期23-27,共5页 Leather Science and Engineering
基金 浙江省厅市会商重大科研项目(2008C01073) 温州市重大科研项目(G20080059)资助
关键词 PVC人造革 添加剂 低温发泡 PVC artificial leather additives low temperature foaming method
  • 相关文献

参考文献13

二级参考文献23

共引文献69

同被引文献22

  • 1宁寻安,叶锦新.PVC人造革生产中增塑剂有机废气治理研究[J].聚氯乙烯,2004,32(4):22-25. 被引量:4
  • 2范浩军.人造革、合成革材料及工艺学[M].北京:轻工业出版社,2009:258.259.
  • 3Brian L Wadey.An Innovative Plasticizer for Sensitive Appli- cations [J].Joumal of Vinyl & Additive Technology,2003,9(4): 172-176.
  • 4Gosse Claudius, Larson Thomas Marshall, Leqrand Pierre Jean Paul, etal.Plasticised Polyvinyl Chloride: US,74 138[P]. 2008-08-19.
  • 5Melanie Brunner, Bottcher Arnd, Breitscheidel Boris, et al. Method for Hydrogenating Benzene Polycarboxylic Acids or Derivatives Thereof by Using a Catalyst Containing Macrop- ores: US,6284917[P].2001-09-04.
  • 6Leonard I Nass.Encyclopedia of PVC (Volume 1) [M].New York : Marcel Dekker, Inc., 1976: 269-270.
  • 7李成祥,贾茂林,赵占群,等.服装革用环氧大豆油增塑剂的开发及应用性能研究[J].人造革合成革,2012,(7).41-52.
  • 8Wang Xiaolan, Zhang Shijun, Zhang Xiao, et al. The modification and compatibilization of PA6 through GMA grafted SEBS [J]. China Synthetic Resin and Plastics, 2003,20(4) : 51-55.
  • 9Wu Shunying, Xu Jingyi. Foam molding [M]. Beinjing : Chemical Industry Press, 1992.
  • 10Wang Xiaolan, Zhang Shijun, Zhang Wei. The modification and compatibilization of PA6 through GMA grafted SEBS [J]. China Synthetic Resin and Plastics, 2003,20(4): 51-55.

引证文献2

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部