期刊文献+

氦气轮机瞬态运行特性仿真研究 被引量:5

Research on Transient Operation Characteristics of Helium Gas Turbine by Simulation
下载PDF
导出
摘要 通过建立高温气冷堆氦气轮机各部件的集总参数数学模型,利用Matlab/Simulink仿真软件构建仿真模型,对氦气轮机起动过程的瞬态运行特性进行了仿真研究,给出了高、低压压气机运行线以及压气机出口压力、堆芯进出口温度、涡轮功率、压气机功率、发电机功率等主要参数随堆芯功率的变化曲线。模拟计算结果表明,在氦气轮机起动过程中,主要参数曲线变化趋势与设计要求一致,瞬态特性的仿真结果合理、可信。 By setting up the lumped parameter mathematic models of HTGR helium gas turbine and compressor device,and using Matlab/Simulink to build the simulation models,the transient operation characteristics of startup process of helium gas turbine were studied.The simulation results give the operation curves for high pressure compressor,low pressure compressor,and some key curves of compressor outlet pressure,core inlet and outlet temperature,turbine power,compressor power and generator power changing with core power.The calculation results show that,in the startup process,the trends of these main parameter curves meet the design requirements,and the transient characteristics simulation results are reasonable.
出处 《核动力工程》 EI CAS CSCD 北大核心 2011年第2期81-85,共5页 Nuclear Power Engineering
基金 高等学校创新引智计划资助项目(B08047)
关键词 氦气轮机 瞬态特性 仿真 高温气冷堆 Helium gas turbine Transient characteristics Simulation High Temperature Gas-Cooled Reactor
  • 相关文献

参考文献5

  • 1TBelytschko, MoeS Usui N, Parimi C. Arbitrary Discontinuities in Finite Elements [J]. Int. J. Numer. Meth. Engng(S0029-598 I), 2001, 50(4): 993 - 1013.
  • 2Nicolas Moes, John-Dolbow, "Ted Belytschko. A Finite Element Method for Crack Growth without Remeshing [J]. Int. J. Numer. Meth. Engng (S0029-5981), 1999, 46(1): 131-150.
  • 3Wang J, Gu Y H. Parametric Studies on Different Gas Turbine Cycles lbr a High Temperature Gas-Cooled Re actor [J]. Nuclear Engineering and Design, 2005, 235: 1761-1772.
  • 4王捷.高温气冷堆氦气透平循环热工特性的初步研究[J].高技术通讯,2002,12(9):91-95. 被引量:32
  • 5Sadik Kakac, Hongtan Liu. Hezt Exchangers: Selection. Rating and Thermal Design [M]. China: CRC Press LLC, 1998.

共引文献31

同被引文献38

引证文献5

二级引证文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部