期刊文献+

时效处理对Al_(0.5)CoCrFeNi高熵合金微观组织和力学性能的影响 被引量:16

Effect of Aging Treatment on Microstructures and Mechanical Properties of Al_(0.5)CoCrFeNi High-Entropy Alloy
下载PDF
导出
摘要 对Al0.5CoCrFeNi高熵合金经不同温度时效处理24 h后的微观组织和力学性能进行研究。结果表明:时效处理前后,Al0.5CoCrFeNi高熵合金均由简单的体心立方相和面心立方相组成,组织主要为树枝晶形貌。但是,随着时效温度的升高(800℃和1 000℃),树枝晶析出弥散分布的针状第二相,且第二相数量不断增大。由于第二相的弥散强化作用,时效处理能显著提高合金的抗拉强度。 The microstructures and mechanical properties of Al0.5CoCrFeNi high-entropy alloy aged at temperatures range from 600 ℃ to 1 000 ℃ for 24 h were studied.The results show that FCC and BCC phase structures remain unchanged after aging treatment,and the microstructures mainly are dendrite.However,with the increase of aging temperature,dispersive second phase precipitates and the amount of second phase increases.Furthermore,the aging treatment can enhance tensile strength due to the dispersion strengthening of second phase.
出处 《有色金属(冶炼部分)》 CAS 北大核心 2011年第4期47-50,共4页 Nonferrous Metals(Extractive Metallurgy)
基金 国家大学生创新性试验计划项目(091038629)
关键词 时效处理 微观组织 高熵合金 机械性能 Aging treatment Microstructure High-entropy alloy Mechanical properties
  • 相关文献

参考文献12

  • 1Porter D A,Easterling K E.Phase transformations in metals and alloys[M].UK:Van Nost-rand Reinhold Co Ltd,1981:4-28.
  • 2Liu C T,Stiegler J O.Ductile Ordered Intermetallic Alloys[J].Science,1984,226(4675):636-642.
  • 3唐海林,朱心昆,李钢,赖华.机械合金化制备Mg-Fe超腐蚀合金[J].有色金属(冶炼部分),2006(4):53-56. 被引量:3
  • 4Liu C T.Recent advances in ordered intermetallics[J].Materials Chemistry and Physics,1995,42 (2):77-86.
  • 5Greet A L.Confusion by design[J].Nature,1993,366(25):303-304.
  • 6Yeh J W,Chen S K,Lin S J.Nanostructured high-en-tropy alloys with multiple principal elements:novel alloy design concepts and outcomes[J].Advanced Engineering Material,2004,6(5):299-303.
  • 7Yeh J W,Chen S K,Gan J Y.Formation of simple crystal structures in Cu-Co-Ni-Cr-A1-Fe-Ti-V alloys with muhiprincipal metallic elements[J].Metallurgical and Materials Transactions A,2004,35 (8):25332536.
  • 8叶均蔚 陈瑞凯 刘树均.高熵合金的发展概况.工业材料杂志,2005,224:71-79.
  • 9Tong C J,Chen Y L,Chen S K,et al.Microstructure Characterization of AlxCoCrCuFeNi High-Entropy Alloy System with Multiprincipal Elements[J].Metallurgical and Materials Transactions A,2005,36(4):881-893.
  • 10Tong C J,Chen M R,Chen S K,et al.Mechanical Performance of the AlxCoCrCuFeNi High-Entropy Alloy System with Multiprincipal Elements[J].Metallurgical and Materials Transactions A,2005,36(5):1263-1271.

二级参考文献6

  • 1Sergev S S, Black S A, Jenkins J F. Supercorroding Galvanic Cell Alloys for Generation of Heat and Gas: United States Patent, 4,264,362[P] ,April 28, 1981.
  • 2Black S A, Jenkins J F. Powdered Metal Source for Production of Heat and Hydrogen Gas:United States Patent ,4,017,414[P] ,April 12, 1977.
  • 3Gilman P S, Benjamin J S. Mechanical Alloying[J]. Ann Rev Mater Sci., 1983,13:297 - 300.
  • 4Koch C C. Materials Synthesis by Mechanical Alloying[J].Ann Rev Mater Sci., 1989,19 : 121 - 143.
  • 5Tunold R, Holtan H, Berfe M B H, et al. The Corrosion of Magnesium in Aqueous Solution Containing Chloride Ions[ J ]. Corros Sci., 1977,17 : 353.
  • 6Allan Forats, Terje Kr Aune, David Hawke, et al. Metal Handbook 9th Edition (Vol 12) Corrosion[M] . U S A:ASM International, 1987 : 740.

共引文献29

同被引文献180

引证文献16

二级引证文献156

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部