摘要
设计了环焊缝超声波扫查器导轨夹持行走机构。该行走机构采用带有凸缘的从动轮夹紧导轨,由类齿形主动轮与导轨啮合,驱动扫查器行走。为验证该行走机构的可靠性,设计并完成了与其原理完全一致的原理验证样机,同时进行了模拟扫查器沿环形导轨行走试验。试验表明,当自重24 kg对其施加600 N夹紧力时,行走机构能够可靠地沿环形导轨圆周运动。该行走机构原理验证样机为后续扫查器行走方案提供了可靠的依据。
An orbit-holding traveling mechanism of girth weld ultrasonic scanning equipment was designed in this paper.It held the orbit by engaged wheels with flange and drove the scanning equipment by a tooth-shaped driving wheel engaging with the orbit.In order to verify the reliability of this traveling mechanism,a prototype which works in the same way as the orbit-holding traveling mechanism was manufactured in this paper.And the experiment simulated the scanning equipment traveling along a orbit was completed,which showed that the traveling mechanism could travel along an orbit reliably when it weighed 24 kg and was exerted a 600N force.The prototype of traveling mechanism provided reliable evidence for the later traveling plan of scanning equipment.
出处
《无损检测》
2011年第3期52-54,共3页
Nondestructive Testing
基金
国家十一五863计划"深水海管水下回接技术及AUT检验设备国产化技术研究"资助项目(2006AA09A105-4)
关键词
环焊缝
超声波检测
扫查器
导轨夹持行走机构
Girth weld
Ultrasonic testing
Scanning equipment
Orbit-holding traveling mechanism
