期刊文献+

一种改进的压气机叶尖泄漏流堵塞预估模型及数值验证 被引量:1

Modified blockage model of tip leakage flow and its validation
原文传递
导出
摘要 基于压气机叶尖间隙内的流动为Couette流动的实际情况,改进了适用于低速压气机的麻省理工学院Khalid叶尖泄漏堵塞预估模型;同时考虑叶尖泄漏流经过激波后堵塞迅速增加,发展了适用于跨声速压气机的叶尖泄漏流堵塞预估模型.对某低速轴流压气机单转子、跨声压气机单转子进行全三维黏性数值模拟,将计算得到的叶尖泄漏堵塞量与模型预测得到的堵塞量进行对比,结果表明此模型较Khalid模型能够更加准确地预测低速压气机的堵塞,同时能够用于预测跨声压气机叶尖泄漏流堵塞. Based on the common cognition of the tip clearance flow,which has a significant influence on compressor performance and MIT(Massachusetts Institute of Technology) Khalid tip leakage model,a blockage model of tip leakage flow in the condition of low-speed and transonic was deduced in this paper.With analysis of the real flow case in tip clearance and diffusion passage,the aerodynamic design parameters,such as loading,cord length,etc,on the rotor tip and the influence of shock wave on tip leakage loss were analyzed in this model.The three-dimensional numerical simulation results show that this model can track the behaviors of jam resulted from compressor tip clearance flow.
出处 《航空动力学报》 EI CAS CSCD 北大核心 2011年第5期1104-1110,共7页 Journal of Aerospace Power
基金 国家自然科学基金(10902008 50906001)
关键词 压气机 叶尖间隙 泄漏流 泄漏涡 堵塞 compressor tip clearance leakage flow leakage vortex blockage
  • 相关文献

参考文献12

  • 1Stauter R C. Measurement of the three dimensional tip region flow field in an axial compressor[J]. ASME Journal of Turbomaehinery, 1993,115 (3) :468-476.
  • 2Foley A C,Ivey P C. Measurement of tip-clearance flow in a multistage,axial flow compressor[J]. ASME Journal of Turomachinery, 1996,118(2) : 211-217.
  • 3Rains D A. Tip clearance flows in axial flow compressors and pumps[D], Pasadena, California : California Institute of Technology, 19 5 4.
  • 4Chen G T,Greitzer E M,Tan C S,et al. Similarity analysis of compressor tip clearance flow structure [J]. ASME Jounral of Turbomachinery,1991,113(2):260-271.
  • 5杨策,马朝臣,王延生,老大中.透平机械叶尖间隙流场研究的进展[J].力学进展,2001,31(1):70-83. 被引量:32
  • 6Khalid S A,Khalsa A S,Waitz I A,et al. Endwall blockage in axial compressors[J].ASME Journal of Turbomachincry, 1999,121 (3) : 499-509.
  • 7Khalid S A. The effects of tip clearance on axial compressor pressure rise[D]. Massachusetts: Massachusetts Institute of Technology, 1995.
  • 8Kang S, Hirsch C. Numerical simulation of three-dimensional viscous flow in a linear compressor cascade with tip clearance[J]. ASME Journal of Turbomaehinery, 1996, 118(3) :492-505.
  • 9Inoue M, Kuroumaru M, Fukuhara M. Behavior of tip leakage flow behind an axial compressor rotor[J]. ASME Journal of Engineering for Gas Turbines and Power, 1986, 108(1):7- 14.
  • 10Lakshminarayana B, Zaccaria M, Marathe B. The structure of tip clearance flow in axial flow compressors[J]. ASME Journal of Turbomachinery, 1995,117(3) : 336-347.

二级参考文献8

  • 1郭延虎.跨音速叶轮机械中三维黏性流场结构的数值研究(博士学位论文)[M].北京:清华大学,1996..
  • 2郭廷虎,博士论文,1996年
  • 3Kang S,ASME J Turbomachinery,1996年,118卷,3期,492页
  • 4Sjolander S A,ASME J Turbomachinery,1995年,117卷,4期,578页
  • 5Kang S,ASME J Turbomachinery,1994年,116卷,4期,657页
  • 6Chen G T,ASME J Turbomachinery,1991年,113卷,2期,260页
  • 7Yaras M I,ASME J Turbomachinery,1989年,111卷,3期,278页
  • 8贾希诚,王正明.叶顶间隙对环形叶栅三维粘性流场影响的数值分析[J].工程热物理学报,1999,20(6):707-710. 被引量:8

共引文献39

同被引文献5

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部