摘要
以DSP为CPU移植嵌入式实时操作系统,多任务实现火焰信号的采集与处理.给出了系统硬件平台的框架图,实现了uC/OS-Ⅱ在DSP上的移植,并在此系统上创建6个任务,完成了系统软件的设计,最终实现实时监控火焰的目的.
With DSP as CPU and the embedded RTOS（Real-Time Operating System） transplanted,the flame signal gathering and processing system is realized by multitasking.The frame chart of hardware design is given,and the transplant of uC/OS-Ⅱon DSP is realized. On this system,six operating system＇s tasks are created and the software design is completed. Finally,real-time monitoring of flame signal is achieved.
出处
《南开大学学报（自然科学版）》
CAS
CSCD
北大核心
2011年第2期17-21,共5页
Acta Scientiarum Naturalium Universitatis Nankaiensis
