期刊文献+

Influence of deformation on precipitation in AZ80 magnesium alloy

Influence of deformation on precipitation in AZ80 magnesium alloy
下载PDF
导出
摘要 Precipitates in the conventionally processed (solution treatment followed by aging) AZ80 alloy are coarse, cellular, and incoherent. They nucleate and grow on the basal planes of the matrix or distribute discontinuously in the alloy. Their unique morphology and undesired distribution make them ineffective for precipitation strengthening. This condition, however, can be modified by applying selected deforma-tion and heat treatment conditions. The effect of deformation and heat treatment on the morphology and distribution of precipitates has been studied. Deformation was introduced by hot extrusion, cold rolling, or equal channel angular pressing (ECAP). The microstructures were characterized using scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The results showed that cold de-formation improved precipitation more significantly than hot deformation, and twinning promoted precipitation more effectively than slip. When ECAP was applied, the Bc-route induced more precipitates than the A-route. Precipitates in the conventionally processed (solution treatment followed by aging) AZ80 alloy are coarse, cellular, and incoherent. They nucleate and grow on the basal planes of the matrix or distribute discontinuously in the alloy. Their unique morphology and undesired distribution make them ineffective for precipitation strengthening. This condition, however, can be modified by applying selected deforma-tion and heat treatment conditions. The effect of deformation and heat treatment on the morphology and distribution of precipitates has been studied. Deformation was introduced by hot extrusion, cold rolling, or equal channel angular pressing (ECAP). The microstructures were characterized using scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The results showed that cold de-formation improved precipitation more significantly than hot deformation, and twinning promoted precipitation more effectively than slip. When ECAP was applied, the Bc-route induced more precipitates than the A-route.
出处 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2011年第3期338-343,共6页 矿物冶金与材料学报(英文版)
基金 supported by the National Natural Science Foundation of China (Nos.50571009 and 50771019)
关键词 magnesium alloys PRECIPITATION DEFORMATION AGING magnesium alloys precipitation deformation aging
  • 相关文献

参考文献2

二级参考文献30

  • 1路林林,杨平,王发奇,钟伟珍.形变热处理对AZ80镁合金组织及性能的影响[J].中国有色金属学报,2006,16(6):1034-1039. 被引量:19
  • 2S.R.Agnew, J.A,Horbon, T.M.Lillo, D.W.Brown,Enhanced ductility in strongly texture magnesium produced by equal channel angular processing, Scripta Ma~ terialia, 50(3), 377(2004).
  • 3B.Chen, D.L.Lin, LAin, X.Q.Zeng, C.Lu, Equal-channel angular pressing of magnesium alloy AZ91 and its effect on microstructure and mechanical properties, Material Science and Engineering, A483-484, 113(2008).
  • 4M.Eddahbi, J.A.del Valle, M.T.Perez-Prado, O.A.Ruano, Comparison of the microstructure and thermal stability of an AZ31 alloy processed by ECAP and large strain hot rolling, Material Science and Engineering, A410-411, 308(2005).
  • 5M.Janecek, M.Popov, M.G.Krieger, R.J.Hellming, Y.Estrin, Mechanical properties and microstructure of a Mg alloy AZ31 prepared by equal-channel angular pressing, Material Science and Engineering, A462, 116(2007).
  • 6T.Mukai, M.Yamanoi, H.Watanabe, K.Higashi, Ductility enhancement in AZ31 magnesium alloy by controlling its grain structure, Scripta Materialia, 45(1), 89(2001).
  • 7A.Yamashita, Z.Horita, T.C.Langdon, Improving the mechanical properties of magnesium and a magnesium alloy through severe plastic deformation, Material Science and Engineering, A300, 142(2001).
  • 8W.J.Kim, C.W.An, Y.S.Kim, S.I.Hong, Mechanical properties and microstructures of an AZ61 Mg Alloy produced by equal channel angular pressing, Scripta Materialia, 47(1), 39(2002).
  • 9Q.G.Xie, P.Yang, F.E.Cui, Influence of deformation on precipitation and recrystatlization in an AZ80 magnesium alloy, Materials Science Forum, 546-549, 293(2007).
  • 10D.Duly, M.Audier, Y.Brechet, On the influence of plastic deformation on discontinuous precipitation in Mg-Al, Scripta Metallurgica et Materialia, 29(12), 1593(1993).

共引文献11

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部