期刊文献+

复合地层盾构切削系统的刚柔耦合分析

Analysis on rigid rlexible coupling of cutting system of the shield machine in composite strata
下载PDF
导出
摘要 复合地层载荷的时变性及盾构切削系统动力传递的复杂性使得对切削系统及其相关零部件的设计校核变得较为困难。通过刚柔耦合方法,根据复合地层外部载荷特征,以切削系统主轴承内圈(大齿圈)为分析对象,将其作为柔性体对盾构切削系统进行接触力求解,以获得的接触力作为外载进行轴承内圈的有限元分析。所建模型及采用的分析方法有效提高了复杂载荷边界条件的提取效率及有限元仿真精度,为进行盾构切削系统关键零部件的设计校核奠定了基础。 The time variation of composite strata load and the complexity of the power transfer of the shield machine cutting system make the design and check of the cutting system and related parts more difficult.Through the rigid flexible coupling method,the contact force solution of the shield machine cutting system is implemented with the large gear ring being treated as a flexible body based on the external load characteristics of composite strata,and a finite element analysis of bearing inner race is carried out by taking the contact force obtained as external load.The model built and the analytical method adopted improves the extraction efficiency of the complex loading boundary conditions and the accuracy of finite element simulation,which makes a foundation for design and check of the key parts of the shield machine cutting systems.
出处 《机械设计与制造》 北大核心 2011年第6期114-116,共3页 Machinery Design & Manufacture
基金 国家重点基础研究发展规划(973)项目(2007CB714007)
关键词 复合地层 刚柔耦合 接触力 有限元分析 Composite strata Rigid flexible coupling Contact force FEA
  • 相关文献

参考文献4

二级参考文献15

  • 1龙慧,张光辉,欧恒安.渐开线直齿轮啮合过程中载荷及应力的计算机模拟[J].机械工程学报,1995,31(5):39-45. 被引量:14
  • 2刘咀宁.盾构机主轴承密封的调整和更换[J].建筑机械,2006,26(09S):101-103. 被引量:19
  • 3Simon V. Load and stress distributions in spur and helical gears[J]. Journal of Mechanisms, Transmissions and Automation in Design, 1988, 110: 197-202.
  • 4Wang Y, Cheung H M E, Zhang W J. 3D dynamic modeling of spatial geared systems[J]. Nonlinear Dynamics,2001, 26: 371-391.
  • 5Oh Sejoong, Grosh Karl, Barber James R. Energy conserving equations of motion for gear systems[J]. ASME Journal of Vibration and Acoustics, 2005, 127(4): 208-212.
  • 6Velex P, Cahouet V. Experimental and numerical investigations on the influence of tooth friction in spur and helical gear dynamics[J]. ASME Journal of Mechanical Design,2000, 122(12): 515-522.
  • 7Wang Y, Zhang W J. Stochastic vibration model of gear transmission systems considering speed-dependent random errors[J]. Nonlinear Dynamics, 1998, 17: 187-203.
  • 8Lewicki David G, Handschuh Robert F, Spievak Lisa E, et al. Consideration of moving tooth load in gear crack propagation[J]. ASME Journal of Mechanical Design, 2001, 123(3): 118-124.
  • 9Pimsarn M, Kazerounian K. Pweudo-interference stiffness estimation, a highly efficient numerical method for force evaluationin contact problems[J]. Engineering with Computers, 2003, 19: 85-91.
  • 10Johnson K L. Contact Mechanics[M]. Cambridge : Cambridge University Press, 1985.

共引文献102

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部