期刊文献+

基于ANSYS的坝面机械密封性能分析 被引量:1

Performance analysis of dam sealing based on ANSYS
下载PDF
导出
摘要 以坝面机械密封环为研究对象,研究其在不同温度及转速下的密封性能。针对坝面密封接触面小的特点,利用ANSYS软件模拟其密封特性,分析结果表明,随着转速的升高,端面内侧温升相对传统的机械密封上升幅度较小,相对接触宽度减小,最大接触压力有减小趋势;随着温度的提高,坝面密封端面间隙减小,在一定程度上增强结构的密封性能,但同时内侧接触压力及温度有一定的提高,使磨损增强,但综合考虑下,该坝面密封能很好的适合中高温及高转速的密封环境。 By choosing dam seal ring as research object,the sealing performance in different temperature and different speed is studied.In response to the features of less contact area of the dam sealing,its seal characteristics are simulated by ANSYS,which results reveal that,with the velocity increases,the temperature of interior face rises relatively compared with the traditional mechanical seal,and relative contact area decreases with contact pressure being lower.While with rising of temperature,the clearance of dam seal becomes smaller,which may enhance the sealing performance to a certain extent,at the same time,interior contact pressure and temperature rises,which would increase abrasion.Above all by considering comprehensively,the dam seal suits well to the mid-high temperature and high speed sealing environment.
出处 《机械设计与制造》 北大核心 2011年第6期206-208,共3页 Machinery Design & Manufacture
基金 国家自然科学基金项目资助(50979084)
关键词 坝面密封 传统机械密封 摩擦热 Dam seal Traditional mechanical seal Friction heat
  • 相关文献

参考文献3

二级参考文献8

  • 1朱汉华,刘正林,温诗铸,严新平.Mechanical Deformation of Ship Stern-Shaft Mechanical Face Seals[J].Tsinghua Science and Technology,2004,9(3):299-302. 被引量:2
  • 2周剑锋,顾伯勤.机械密封环的传热特性分析[J].机械工程学报,2006,42(9):201-206. 被引量:34
  • 3[2] 王瑁成,邵敏.有限元法基本原理和数值方法.清华大学出版社,1997.
  • 4Harp Susan R, Salant Richard F. Inter-asperity cavitation and global cavitation in seals: An average flow analysis. Tribology International,2002,35 :113~121
  • 5Parviz Merati, Nori Aki Okita. Experimental and computational investigation of flow and thermal behavior of a mechanical seal[J]. Tribology Tanscations, 1999, 42(4): 731-738.
  • 6Li Feixue. Pressure distribution and temperature distribution analysis of wet multi-disc brake[D]. Beijing: University of Science and Technology Beijing, 2001.52-53.
  • 7Zhu Xueming, Liu Zhenglin, Zhu Hanhua, Hu Shelai. Research on thermal-structure coupled analysis of mechanical seal rings[J]. Journal of Wuhan University of Technology (Transportation Science & Engineering), 2005, 29(2): 198-201.
  • 8李冬林,于有生,温家伶,陈明清.堆焊温度场的三维动态模拟[J].武汉理工大学学报(交通科学与工程版),2002,26(5):671-673. 被引量:21

共引文献41

同被引文献9

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部