期刊文献+

虚拟迭代技术在油箱托挂件上的应用研究 被引量:1

Research on Application of Virtual Iteration Technology on Oil Tank Add-on Parts
下载PDF
导出
摘要 在ADAMS中建立了油箱总成及一段车架的6自由度刚柔耦合的多体动力学模型,并以车辆试验场道路油箱和车架上的实测加速度作为输入条件,结合虚拟迭代和有限元技术获取了油箱总成的边界载荷与油箱托挂件上的应力。计算结果与试验结果对比表明,该方法可有效预测油箱托挂件上的动态应力。同时,该计算方法也可应用于车辆的其他托挂零件及总成的疲劳寿命分析和结构优化等方面的研究工作。 A rigid-flexible coupled multi-body dynamic model with 6 degree-of-freedom of oil tank assembly and a part of frame was built in ADAMS,with measured acceleration of oil tank and frame on the auto proving ground as input conditions.The boundary load of the oil tank assembly and the stress of the oil tank add-on parts were obtained by the virtual iteration and finite element technology.The comparison between the calculation results and test result indicates that this method can effectively predicate dynamic stress of oil tank add-on parts.Meanwhile,this method can also be used in fatigue life analysis and structure optimization of other add-on pars and assemblies of vehicle.
出处 《汽车技术》 北大核心 2011年第6期30-33,共4页 Automobile Technology
关键词 油箱 托挂件 虚拟迭代技术 动态应力 Oil tank assembly Add-on parts Virtual iteration Dynamic stress
  • 相关文献

参考文献4

二级参考文献35

  • 1王宏伟,骆红云,钟群鹏.汽车前轴的疲劳试验及其疲劳寿命的预测[J].金属热处理,2007,32(z1):56-58. 被引量:4
  • 2王红岩,芮强.履带车辆悬挂系统关键部件疲劳寿命预测技术研究[J].装甲兵工程学院学报,2006,20(1):44-47. 被引量:8
  • 3胡玉梅,陶丽芳,邓兆祥,王攀,冯刚.车身台架疲劳强度试验方案研究[J].汽车工程,2006,28(3):300-303. 被引量:22
  • 4胡经国,刚宪约,张鲁邹,苏炳玲.VPG技术在汽车中的应用[J].农业装备与车辆工程,2006,44(7):32-35. 被引量:2
  • 5张洪欣.汽车行驶平顺性的计算机预测[J].汽车工程,1986,(1).
  • 6Ferry W B, Frise P R, Andrews G T, et al. Combining virtual simulation and physical vehicle test data to optimaze durability testing[J]. Fatigue and Fracture of Engineering Materials and Structures, 2002,25 : 1127.
  • 7Craig R R, Bampton M C C. Coupling of substructures for dynamics analysis[J]. AIAA Journal, 1968,6(7): 1313.
  • 8Sridhar Srikantan, Shekar Yerrapalli, Hamid Keshtkar. Durability design process for truck body structures[ J]. International Journal of Vehicle Design, 2000, 23 (1/2) :95 - 108.
  • 9Sigmund Kyrre As. Fatigue assessment of aluminum automotive structure[D]. Norwegian: Norwegian University of Science and Technology, 2002.
  • 10Michelberger P, Palkovics L, Bokor J. Robust design of active suspension system [J]. Int J. of Vehicle Design, 1993, 14 (2/3) : 145 - 165.

共引文献76

同被引文献6

引证文献1

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部