期刊文献+

基于响应面法的梯形直肋散热板优化设计 被引量:7

Optimized Design of Trapezoidal Straight Fin Heat Sink Based on RSM
下载PDF
导出
摘要 研究对于梯形直肋散热板的优化设计方法,考虑热传导、对流和热辐射,利用有限元热分析软件Icepak对自然对流散热进行仿真分析,利用正交试验设计提取计算点,建立响应面函数,对肋根厚、肋高、肋间距和肋面尖角4个参数进行优化设计,并对优化结果进行仿真验证。 The heat transfer,including heat conduct,natural convection and radiation,of a trapezoidal straight fin heat sink was simulated by Icepak.The fin root thickness,fin height,fin spacing and fin surfaces angle were optimized based on RSM(response surface methodology) with calculation data gained from orthogonal experiment approach.The optimization result which improved the heat transfer efficiency obviously was checked with simulation.
出处 《机械科学与技术》 CSCD 北大核心 2011年第7期1168-1170,1178,共4页 Mechanical Science and Technology for Aerospace Engineering
关键词 梯形直肋散热板 正交试验 响应面法 Icepak 优化设计 trapezoidal straight fin type hest sink orthogonal experiment Icepak optimized design response surface methodology(RSM)
  • 相关文献

参考文献20

  • 1Harris T A. Roiling Bearing Amdysis [M]. Wiley, 1966.
  • 2Cooper D H. Hertzian contact-stress deformation coefficients[J]. ASME Journal of Applied Mechanics, 1956,36:296 - 603.
  • 3Roark R J, Young W C. Formulas for Stress and Strain[M]. McGaw-Hill, 5th Ed. , 1975, 516 -518.
  • 4Brewe D E, Hamrock B J. Simplified solution for elliptical-con- tact deformation between two elastic solids [ J ]. ASME Journal of Triboiogy, 1977,99:485 -487.
  • 5Hanm~k B J, Brewe D E. Simplified solution for stresses and deformations [ J ]. ASME Journal of Lubrication Technology, 1983,105:171 -177.
  • 6Greenwood J A. Formulas for moderately elliptical Hertzian con- tacts [ J ]. ASME Journal of Tribology, 1985,107:501 - 504.
  • 7Greenwood J A. Analysis of elliptical Herzian contacts[J]. Tri- boiogy International, 1997,30 ( 3 ) :235 - 237.
  • 8Markho P H. Highly accurate formulas for rapid calculation of the key geometrical parameters of elliptic Hertzian contacts [ J ]. ASME Journal of Triboiogy, 1987,109:640-647.
  • 9Dyson A, Evans H P, Snidle R F. A simple, accurate method for calculation of stresses and deformations in elliptical Herzian contacts [ J ]. Journal of Mechanical Engineering and Sci- ence, 1992,206:139 - 141.
  • 10Houpert L. An engineering approach to Hertzian contact elasticity Part I[J].ASME Jouurnal of Tribology,2001,123:280-588.

二级参考文献13

共引文献33

同被引文献50

  • 1张永存,崔雷,周玲丰,杨迪雄,刘书田.基于拓扑优化的机床床鞍创新构型设计[J].固体力学学报,2011,32(S1):335-342. 被引量:9
  • 2阎军,孙兴盛,王乜,王舒,毛火华,刘书田.半导体照明灯具典型散热结构分析与优化[J].固体力学学报,2010,31(S1):285-293. 被引量:9
  • 3李帅辉,舒勇华,唐锦荣,樊菁.真空辐射加热基片的温度分布[J].力学与实践,2006,28(3):19-23. 被引量:2
  • 4张毅,俞小莉,陆国栋,夏立峰,蒋平灶.间距对散热器模块匹配性能影响的试验研究[J].内燃机工程,2006,27(5):46-49. 被引量:11
  • 5曹茹,商跃进.SolidWorks2009三维设计及应用教程[M].北京:机械工业出版社,2010.
  • 6Yuan Y,Jackson A,Nelson M.CFD Simulation of Flow andHeat Transfer in Airways[R].SAE Technical Paper,2001-01-1712.
  • 7Halici F,Taymaz I,Gunduz M.The effect of the number of tuberows on heat,mass and momentum transfer in flat-plate finnedtube heat exchanges[J].Energy,2001,26(11):963~972.
  • 8Kim M H,Bullard C W.Air-side thermal hydraulic performanceof multi-louvered fin aluminum heat exchangers[J].Interna-tional Journal of Refrigeration,2002,25(3):390~400.
  • 9Tai C,Cheng C,Liao C.A Practical and Simplified AirflowSimulation to Assess Underhood Cooling Performence[R].SAE Technical Paper,2007-01-1402.
  • 10Allen D A,Lasecki M P.Thermal Management Evollutionand Controlled Coolant Flow[R].SAE Technical Paper,2001:SAE,2001-01-1732.

引证文献7

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部