期刊文献+

Influence of Hydrothermal Pre-Treatment of Coal Fly on the Synthesis of Belite Phase

Influence of Hydrothermal Pre-Treatment of Coal Fly on the Synthesis of Belite Phase
下载PDF
导出
摘要 In this paper, the results of an extensive investigation of hydrothermal pre-treatment for synthesizing belite phase from reactive mixtures (CaO/SiO2 molar ratio of 2) consisting of one waste kinds (bottom ash-BA or fly ash-FA) from fluidised brown coal combustion in Slovakian power plant and CaO (analytical grade reagent) addition are summarized. Changes in structure and phase composition of hydrothermally synthesized belite precursors and subsequent calcinated products were compared with those of starting mixtures. Based on XRD diffraction patterns, the formation of the new profiles corresponding to CSH phases with low degree of ordering as belite precursors after hydrothermal treatment was confirmed. Calcination of hydrotermally treated products at 900℃ led to transformation of CSH phases to wollastonite, belite and gehlenite phase. Differences in phase composition of products before and after calcination depend upon waste quality and precursor's synthesis conditions. Bottom ash isn't suitable as raw material for synthesizing belite phase because of high CaO content fixed in anhydrite form (44.1%). Coal fly ash with low CaO content in anhydrite form (4.2%) and its hydrothermal treatment in combination with subsequent heating offer opportunities for the utilization of coal fly ash as raw material for belite production.
出处 《Journal of Environmental Science and Engineering》 2011年第7期816-823,共8页 环境科学与工程(英文版)
关键词 Coal fly ash hydrothermal treatment CSH phase belite. 水热合成 贝利特 水热预处理 煤炭 反应混合物 产品成分 粉煤灰 CaO
  • 相关文献

参考文献19

  • 1W. Jiang, D.M. Roy, Hydrothermal processing of new fly ash cement, American Ceramic Society Bulletin 71 (1992) 642-647.
  • 2A. Guerrero, S. Goni, A. Macias, M.P. Luxan, Mechanical properties, pore size distribution, and pore solution of fly ash-belite cement mortars, Cement Concrete Research 29 (1999) 1753-1758.
  • 3A. Guerrero, S. Goni, A. Macias, Durability of new fly ash-belite cement mortars in sulfated and chloride medium, Cement Concrete Research 30 (2000) 1231-1238.
  • 4A. Guerrero, S. Goni, A. Macias, M.P. Luxan, Effect of thesynthesis temperature on the hydration reaction of fly ah-bellite cement mortars, Cement Concrete Research 30 (2000) 553-559.
  • 5F.A. Rodrigues, Low-temperature sysnthesis of cement from rice hull ash, Cement Concrete Research 33 (2003) 1525-1529.
  • 6A. Guerrero, S. Goni, I. Campillo, A. Moragues, Belite cement clinker from coal fly ash of high Ca content: Optimization of synthesis parameters, EnvironmentalScience Technology 38 (2004)3209-3213.
  • 7A. Guerrero, S. Goni, A. Moragues, J.S. Dolado,Microstructure and mechanical performance of belite cements from high calcium coal fly ash, Journal of the American Ceramic Society 88 (2005) 1845-1853.
  • 8A. Guerrero, S. Goni, J.S. Dolado, Belite cements:Modifications of calcium silicate hydrate (C-S-H) gel by alkaline hydrothermal treatment, ACI Materials Journal 106 (2009) 3209-3213.
  • 9L. Kacimi, A. Simon-Masseron, S. Salem, A. Ghomari, Z.Derriche, Synthesis of belite cement clinker of hihghydraulic reactivity, Cement Concrete Research 39 (2009) 559-565.
  • 10K. Pimraksa, S. Hanjitsuwan, P. Chindaprasirt, Synthesis of belite cement from lignite fly ash, Ceramics International 35 (2009) 2415-2425.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部