期刊文献+

稀土Gd^(3+)与超高分子质量PA6的络合作用 被引量:1

Interaction between Gd^(3+) and ultra-high molecular weight PA6
下载PDF
导出
摘要 以三氯化钆(GdCl3)为络合剂,以甲酸和盐酸作为混合溶剂,配制不同络合比的PA6/GdCl3溶液,涂膜制得试样;采用扫描电子显微镜、红外光谱分析、X射线衍射、差式扫描量热仪和紫外-可见光分析等方法对试样的结构进行研究,并探讨稀土离子在整个PA6体系中所起的作用及络合比对整个体系性能的影响.结果表明:稀土离子与PA6在混合溶剂的溶解下发生了作用,稀土离子破坏了PA6分子间的氢键;络合比对络合能力有很明显的影响. Using gadolinium trichloride (GdC13) as complex agent, formic acid and hydrochloric acid as mixed solvent, the solution systems of PA6/GdC13 with different complex ratios are prepared. The structures of different PA6 samples are analyzed by scanning electron microscopy (SEM), FT-IR spectroscopy, X-ray diffreaction (XRD), differential scanning calorimeter(DSC) and UV-vis spectroscopy to discuss the action of Gd3+on the whole PA6 system and the effect of complex ratio on the performance of system. The results show that the chemical interaction happens between gadolinium ions and PA6 by destroying the internal hydrogen bonding of PA6, and the complexation is influenced by the mole ratios between gadolinium ions and PA6.
出处 《天津工业大学学报》 CAS 北大核心 2011年第4期11-14,18,共5页 Journal of Tiangong University
基金 国家自然科学基金资助项目(50803001) 北京市教委科技发展计划重点项目暨北京市自然基金资助重点项目(KZ201110012016) 北京市科技新星计划项目(2008B06) 北京市属高等学校人才强教计划资助项目(PHR201008291)
关键词 三氯化钆 超高分子质量PA6 络合 gadolinium trichloride ultra-high molecular weight PA6 complexation
  • 相关文献

参考文献14

  • 1MANLEY T R, MARTIN C G. The elastic modulus of nylon[J]. Polymer, 1973,14:632.
  • 2KUNUGI T, SUZUKI A, CHIDA K. Preparation of high-modulus nylon 6 fibers by vibration hot drawing and zone annealing [J]. J Appl Polym Sci, 1998,67: 1993-2000.
  • 3CHO J W, LEE G W, CHUN B C. Mechanical properties of nylon-6 fibers gel-spun from benzyl alcohol solution[J]. J Appl Polym Sci, 1996,62:771-778.
  • 4VASANTHAN N, KOTEK R, JUNG D W. Lewis acid- base complexation of polyamide 66 as a mean to control hydrogen bonding to form high strength fibers and films [J]. Polymer Preprints, 2004,45 ( 1 ) : 787-788.
  • 5VASANTHAN N, KOTEK R, JUNG D W, et al. Lewis acidbase complexation of polyamide 66 to control hydrogen bond ing, extensibility and crystallinity[J]. Polymer, 2004,45: 4077-4085.
  • 6ROBERTS M F, JENEKHE S A. Site-specific reversible scission of hydrogen bonds in polymers:an investigation of polyamides and their Lewis acid-base complexes by infrared spectroscopy[J]. Macromolecules, 1991,24( 11 ) :3142-3146.
  • 7DUNN P, SANSOM G F. The stress cracking of polyamides by metal salts part I:Metal halides[J]. J Appl Polym Sci, 1969, 13 (8): 1641-1655.
  • 8DUNN P, SANSOM G F. The stress cracking of polyamides by metal salts Part III:Metal thiocyanates [J]. J Appl Polym Sci, 1969,13(8) : 1673-1688.
  • 9吴兴立,李小宁,杨中开,牛艳丰,赵永霞.尼龙6的络合与解络合[J].北京服装学院学报(自然科学版),2006,26(4):1-6. 被引量:11
  • 10熊祖江,李小宁,杨中开,刘振东,付中玉,贾清秀.聚合物浓度对PA6/氯化钙冻胶体系结构与性能的影响[J].合成纤维,2009,38(7):25-28. 被引量:3

二级参考文献33

  • 1吴兴立,李小宁,杨中开,牛艳丰,赵永霞.尼龙6的络合与解络合[J].北京服装学院学报(自然科学版),2006,26(4):1-6. 被引量:11
  • 2牛艳丰,李小宁,杨中开.络合对高黏度尼龙6性能的影响[J].北京服装学院学报(自然科学版),2006,26(4):7-11. 被引量:2
  • 3Xu Y X,J Appl Polym Sci,2000年,77卷,2685页
  • 4Sun W X,J Rare Earth,1999年,17卷,7页
  • 5Xu Y Z,SPIE.2089,1993年,198页
  • 6SMOOK J,VOS G J H,DOPPERT H L.A semiempiric model for establishing the drawability of solution-spun linear polyamides and other flexible chain polymers[J].Journal of applied polymer science,1990,41:105-116.
  • 7ANAGNOSTIS E Z,ROGER S P.Reversible plasticization of nylon 6 and 11 with anhydrous ammonia and their deformation by solid-state coextrusion[J].Journal of applied polymer science,1979,24:1371-1382.
  • 8HOE HIN CHUAH,ROGER S P.A new drawing technique for nylon 6 by reversible plasticization with iodine[J].Polymer,1986,27:241-246.
  • 9ACIERNO D,LAMANTIA F P,POLIZZOTTI G.Bulk properties of synthetic polymer-inorganic salt systems V:mechanical properties of oriented poly(caproamide)[J].Journal of polymer science:polymer phy edit,1979,17:1903-1912.
  • 10AALDRIK R P,PAUL S,ALAN D E.Ultra-drawing of polyamides:the hydrogen bond barrier[J].Polymer commuications,1990,31:444-447.

共引文献53

同被引文献35

  • 1孟令明,黄锦河,林志勇,钱浩.氯化钙对尼龙6/66结晶态结构的影响[J].化学工程与装备,2007(3):20-22. 被引量:7
  • 2孙本惠.STUDY ON THE MECHANISM OF NYLON 6, 6 DISSOLVING PROCESS USING CaCl_2/MeOH AS THE SOLVENT[J].Chinese Journal of Polymer Science,1994,12(1):57-65. 被引量:9
  • 3陈红萍,吴雄,徐鹏,王海琼,叶正涛.氯化锂对尼龙6结构与性能影响的研究[J].胶体与聚合物,2007,25(1):15-17. 被引量:4
  • 4XU Y, SUN W, LI W, et al. Investigation on the interaction between polyamide and lithium salts[ J]. Journal of Applied Polymer Science, 2000,77 ( 12 ) : 2685 - 2690.
  • 5WU Y, XU Y, WANG D, et al. FTIR spectroscopic investigation on the interaction between nylon 66 and lithium salts [ J ]. Journal of Applied Polymer Science,2004,91 ( 5 ) : 2869 - 2875.
  • 6VALENTI B, BLANCH1 E, GREPPI G, et al. Bulk properties of synthetic polymer-inorganic salt systems, melting behavior of salted poly (caproamide) [ J]. The Journal of Physical Chemistry, 1973, 77(3) :389 -395.
  • 7AC1ERNO D, BIANCHI E, CIFERRI A, et al. Bulk properties of synthetic polymer inorganic salt systems. III. Flow behavior and glass transition of salted polycaproamide [J].Journal of Polymer Science Polymer Symposia, 1976,54:259 - 269.
  • 8VALENTI B, B1ANCHI E, TEALDI A, et al. Bulk properties of synthetic polymer-inorganic salt systems. IV. role of polymeric substrate [ J ]. Macromolecules, 1976 ( 9 ) : 117 - 122.
  • 9ACIERNO D, LAMANTIA F P, POLIZZOTTI G,et al. Bulk properties of synthetic polymer inorganic salt systems. V. mechanical- properties of oriented poly (caproamide) [ J ]. Journal of Polymer Science: Part B. Polymer Physics, 2010, 34 (5) : 1742 - 1752.
  • 10LIU D,ZHENG Q,LU S,et al. A new method to prepare low melting point polyamide-6 and study crystallization behavior of polyamide-6/ calcium chloride complex by theological method [ J ]. Journal of Applied Polymer Science ,2015,132 ( 8 ).

引证文献1

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部