摘要
为了获取发动机高精度角度信息,实现更为精确的喷油正时控制,利用微处理器TC1796丰富的硬件资源,倍频曲轴方波信号并进行倍频后信号的误差分析。基于TC1796开发板,经过相应的硬件配置和软件设计,获得了高精度的曲轴倍频信号。利用此信号,在4缸4冲程高压共轨柴油机YN30CR上组织喷油正时控制,结果控制精度大大提高,验证了此倍频方法的可靠性和稳定性。
To obtain high precision diesel angle information, improve the precision of injection timing control, the multiple frequency of crankshaft as well as error analysis was used by making use of hardware resources on TC1796 Micro-processor. The study was based o designing software, and then achieved a higher n the TC1796 development board by setting relevant hardware and precision frequency multiplying signal. The precision of injection timing control can be greatly improved by using frequency multiplying in a 4 cylinder 4 strokes High Pressure Common Rail Diesel Engine-YN30CR. This test proves that the algorithm is reliable and stabilized.
出处
《科学技术与工程》
2011年第25期6065-6070,共6页
Science Technology and Engineering
关键词
柴油机
微处理器
曲轴
倍频信号
误差分析
diesel micro-processor crankshaft frequency multiplying signal error analysis -