期刊文献+

SiCp/7090Al复合材料的湿摩擦磨损性能

Wet Friction and Wear Property of SiCp/7090 Al Compsite Material
下载PDF
导出
摘要 对元素粉末热压法制备的体积分数为12%5μm SiCp/7090Al复合材料销与40Cr盘摩擦副和铝青铜销与40Cr盘摩擦副试样,在驻退液浸渍条件下的湿摩擦磨损性能进行了试验研究。结果表明,在本试验的条件下,复合材料的磨损减重小于铝青铜,其与40Cr盘之间的摩擦系数较铝青铜要小,而且复合材料销与40Cr摩擦面的粗糙度也好于铝青铜-40Cr。 The 12vol.% 5 μm SiCp/7090Al pin was produced by element powder hot-pressing method.The wet friction and wear properties of the composite material pin-40Cr friction pair sample and Aluminun Brozen pin-40Cr friction pair sample were studied under impregnating condition in the brake fluid.The results showed that the composite material friction weight reduction was smaller than the Aluminun Brozen friction weight reduction.The friction factor of the composites material and 40Cr plate was smaller than the Aluminum Brozen and 40Cr plate's.The friction surface roughness of the composite material pin and 40Cr were better than the Aluminum Brozen and 40Cr's.
出处 《铸造设备与工艺》 2011年第5期32-34,共3页 Foundry Equipment & Technology
基金 国家预研项目 编号:62401040201
关键词 摩擦磨损 表面形貌 复合材料 friction and wear, surface morphology, composite material
  • 相关文献

参考文献4

二级参考文献54

共引文献43

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部