期刊文献+

岩石钻掘过程中的钻头温度分析 被引量:19

Temperature analysis of drill bit in rock drilling
下载PDF
导出
摘要 为深入研究钻头钻掘岩石过程中的温度变化规律,通过对钻头钻掘岩石的传热过程分析,建立描述钻头在钻掘岩石过程中温度变化的微分方程组,归纳影响钻头温度变化的各种影响因素。在对钻头钻掘岩石过程进行热功转换分析的基础上,给出钻头温度的解析计算方法,并结合钻头切削面温度解析计算式,给出钻头温度的解析方程。研究结果表明:钻头在钻掘岩石过程中的温度受几何条件、热物性质、钻掘参数等因素影响;在其他条件一定的情况下,钻头平均温度升高与钻头推进速度v的平方根成正比。 Temperature variation of the drill bit in the process of rock drilling was studied systematically.Through the analysis of heat transfer process of the drilling in rock drilling,differential equations which described the temperature fluctuations in the process of rock drilling were established and various factors which affected the temperature fluctuations of the drill bit were also analyzed.Based on the analysis of the conversion between thermal and power in rock drilling,analytical method for temperature computation of the drill bit was given.Analytical equation of the bit temperature was derived associated with the analytical expression of cutting temperature.The results show that the temperature of drill bit is influenced by geometry condition,thermal properties,drilling element,and so on.The average rising temperature is proportional to the square root of forward speed v of the drill bit when the other conditions remain unchanged.
出处 《中南大学学报(自然科学版)》 EI CAS CSCD 北大核心 2011年第10期3164-3169,共6页 Journal of Central South University:Science and Technology
基金 国家自然科学基金委创新研究群体专项基金资助项目(50921063) 重庆市杰出青年基金资助项目(CSTC2009BA6047) 重庆大学研究生科技创新基金资助项目(201005B1A0010341)
关键词 岩石 钻掘 侵入 切削 温度 rock drill penetration cutting temperature
  • 相关文献

参考文献16

  • 1Uoharo K. Fundamental approach to the thermal crack of cemented cutting tools[J]. Annals of the CIRP, 1981, 30(1): 256-259.
  • 2Beste U, Jacobson S. A new view of the deterioration and wear of WC/Co cemented carbide rock drill buttons[J]. Wear, 2008, 264: 1129-1141.
  • 3Beste U, Hartzell T, Engqvist H, et al. Surface damage on cemented carbide rock-drill buttons[J]. Wear, 2001, 249: 324-329.
  • 4Join L B. Wear of hard-metals in rock drilling: a survey of the literature[J]. Powder Metall, 1973, 16: 1-32,.
  • 5李晓红,杨晓峰,卢义玉,陆朝晖,杨博凯.水射流辅助硬质合金钻头切割岩石过程的刀具温度分析[J].煤炭学报,2010,35(5):844-849. 被引量:19
  • 6Incropera F P, Dewitt D P. Fundamentals of heat transfer 6th edition[M]. Hoboken: John Wiley & Sons Inc, 2006:231-257.
  • 7NakayamaK.金属切削加工理论[M].北京:机械工业出版社,1985:70-75.
  • 8张绍和,鲁凡.金刚石钻头参数设计规律[J].中南大学学报(自然科学版),2004,35(2):195-200. 被引量:13
  • 9Bever M B, Holt D L, Titchener A L, The stored energy of cold work[M]. Oford, New York: Progress in Materials Science, 1973: 5-177.
  • 10Jaeger J C. Moving sources of heat and the temperature at sliding contacts[J]. Proceedings of the Royal Society of New South Wales, 1942, 76: 203-224.

二级参考文献30

  • 1Beste U, Hartzell T, Engqvist H, et al. Surface damage on cemented carbide rock-drill buttons[J]. Wear,2001,249:324-329.
  • 2Kunio Uoharo. Fundamental approach to the thermal crack of cemented cutting tools[J]. Annals of the CIRP,1981,30( 1 ) :256-259.
  • 3Kindermann P, Schlund P, Sockel H G, et al. High-temperature fatigue of cemented carbides under cyclic loads [ J ]. International Journal of Refractory Metals & Hard Materials, 1999,17:55-68.
  • 4Jaeger J C. Moving sources of heat and the temperature at sliding contacts [J]. Proc. Royal. Soc. of New South Wales, 1942,76 : 203 - 224.
  • 5Milton C Shaw. Metal cutting principles[ M ]. Oxford:Oxford University Press, 1984.
  • 6Yevtushenko A A, lvanykt E G, Ukhanska O M. Trannsient temperature of local moving areas of sliding contact [J]. Tribology International, 1997,30(3):209-214.
  • 7Komanduri R, Hou Z B. Analysis of heat partition and temperature distribution in sliding systems[J]. Wear, 2001,251:925-938.
  • 8Saoubi R M, Chandrasekaran H. Investigation of the effects of tool micro-geometry and coating on tool temperature during orthogonal turning of quenched and tempered steel[J]. International Journal of Machine Tools & Manufacture ,2004,44:213-224.
  • 9Vincent Dessoly, Shreyes N Melkote, Christophe Lescalier. Modeling and verification of cutting tool temperatures in rotary tool turning of hardened steel[J]. International Journal of Machine Tools & Manufacture ,2004,44 : 1 463-1 470.
  • 10Armarego E J A, Karri V, Smith A J R. Fundamental studies of driven and self-propelled rotary tool cutting processes-I theoretical investigation[J]. International Journal of Machine Tools and Manufacture, 1994,34 (6) :785-801.

共引文献29

同被引文献202

引证文献19

二级引证文献78

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部