期刊文献+

The Improvement of Bulk-Heterojunction Order in Polymer Photovoltaic Device

The Improvement of Bulk-Heterojunction Order in Polymer Photovoltaic Device
下载PDF
导出
摘要 The blend morphology and vertical arrangement are critical to the performance of organic bulk-heterojunction photovoltaic devices.In the present paper,the authors proposed a new annealing method that controls the blend morphology and vertical arrangement of two materials by means of simultaneously applying external electrical field and violet irradiation on the active layer of poly(3-hexylthiophene) (P3HT) and -phenyl C61-butyric acid methyl ester(PCBM) during annealing process.By using this annealing method,the power conversion efficiency increased by 36%,which was caused by vertical phased-separated blend of crystalline P3HT and PCBM and better charge extraction of electrodes.X-ray photoelectron spectroscopy(XPS) was measured to prove more fullerene derivatives at the organic/cathode interfaces by using this annealing method.The X-ray diffraction(XRD) analysis and UV-Vis absorption spectrum analysis also revealed more ordered polymer crystallization. The blend morphology and vertical arrangement are critical to the performance of organic bulk-heterojunction photovoltaic devices.In the present paper,the authors proposed a new annealing method that controls the blend morphology and vertical arrangement of two materials by means of simultaneously applying external electrical field and violet irradiation on the active layer of poly(3-hexylthiophene) (P3HT) and -phenyl C61-butyric acid methyl ester(PCBM) during annealing process.By using this annealing method,the power conversion efficiency increased by 36%,which was caused by vertical phased-separated blend of crystalline P3HT and PCBM and better charge extraction of electrodes.X-ray photoelectron spectroscopy(XPS) was measured to prove more fullerene derivatives at the organic/cathode interfaces by using this annealing method.The X-ray diffraction(XRD) analysis and UV-Vis absorption spectrum analysis also revealed more ordered polymer crystallization.
出处 《光谱学与光谱分析》 SCIE EI CAS CSCD 北大核心 2011年第12期3175-3179,共5页 Spectroscopy and Spectral Analysis
基金 supported by the National Natural Science Foundation of China under grant No.10934001 the National Basic Research Program of China under grant No.2009CB930504
关键词 Polymer photovoltaic device BULK-HETEROJUNCTION Annealing method Polymer photovoltaic device Bulk-heterojunction Annealing method
  • 相关文献

参考文献18

  • 1Yu G, Gao J, Hummelen J C, et al. Science, 1995, 270: 1789.
  • 2Li G, Shrotriya V, Huang J, et al. Nat. Mater. , 2005, 4: 864.
  • 3Kim K, Liu J, Namboothiry M A G, et al. Appl. Phys. Lett. , 2007, 90: 163511.
  • 4Park S H, Roy A, Beaupre S, et al. Nature Photonics, 2009, 3: 297.
  • 5Reyes-Reyes M, Kim K, Carroll D L. Appl. Phys. Lett. , 2005, 87: 083506.
  • 6Ma W, Yang C, Gong X, et al. Adv. Funct. Mater. , 2005, 15: 1617.
  • 7Clarke Tracey M, Ballantyne Amy M, Nelson Jenny, et al. Adv. Funct. Mater. , 2008, 18: 4029.
  • 8Padinger F, Rittberger R S, Sariciftci N S. Adv. Funct. Mater. , 2003, 13: 85.
  • 9Li Y, Hou Y B, Wang Y, et al. Synthetic Metals, 2008, 158: 190.
  • 10Lee T W, Park O O. Appl. Phys. Lett. , 2000, 77: 3334.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部