摘要
利用万能力学试验机测量了经电渣净化后的ZL205A的抗拉强度和伸长率。结果发现,经电渣净化后的ZL205A的抗拉强度和伸长率大幅下降。利用直读光谱仪分析净化后试样的成分,发现净化后的ZL205A中Ti含量减少近48%。通过在净化后的铝熔体中补加Al-Ti中间合金,测量试样的力学性能,发现其抗拉强度为486.29MPa,和净化前的相当,但伸长率为11%,比净化前提高了100%。
Tensile strength and elongation of ZL205A purified by electro slag were measured with universal mechanical testing machine.The results show that tensile strength and elongation of ZL205A after purification are decreased greatly.The chemical composition of the sample purified was analyzed by direct-reading spectrometer.The results indicate that Ti content is decreased by approximately 48% in purified ZL205A.Through adding Al-Ti master alloy in purified aluminum melt,tensile strength reaches up to 486.29MPa,which is equal to that of the alloy before purification treatment,and elongation is 11%,increased by 100%.
出处
《特种铸造及有色合金》
CAS
CSCD
北大核心
2011年第12期1167-1169,共3页
Special Casting & Nonferrous Alloys
关键词
ZL205A
电渣净化
力学性能
ZL205A
Electro-Slag Refining
Mechanical Properties
