期刊文献+

多壁碳纳米管对环氧树脂/聚醚酰亚胺体系相分离的影响 被引量:1

EFFECTS OF MWCNTs ON PHASE SEPARATION IN EPOXY RESIN/PEI BLEND SYSTEMS
原文传递
导出
摘要 通过溶液混合的方法制备了环氧树脂/聚醚酰亚胺(PEI)/多壁碳纳米管(MWCNTs)三元复合物,并使用扫描电镜(SEM)、原位红外分析(FTIR)、流变测试和非等温DSC等手段研究了MWCNTs的存在对体系相分离形貌和固化反应的影响.扫描电镜的结果显示,在固化后的样品中MWCNTs较均匀地分散在两相中.150℃下固化,不含MWCNTs和MWCNTs含量为0.75 pbw的体系相分离形貌呈海岛状结构,而进一步增大MWCNTs含量后相分离形貌呈双连续结构,且相区尺寸随MWCNTs含量的增加而减小.120℃下固化,不含MWCNTs和MWCNTs含量为0.75 pbw的体系相分离形貌呈双连续结构,而进一步增大MWCNTs含量后,体系相分离形貌呈相反转结构.FTIR和DSC的测试结果表明,MWCNTs表面的羟基对环氧树脂的固化反应起到催化作用,使得固化反应速度加快,反应活化能降低.而流变测试的结果表明,随着MWCNTs含量增加,一方面交叉跨越多个相区的碳纳米管使得体系黏度增大,对相分离起到了一定的抑制作用;另一方面使得体系凝胶化时间提前,导致体系相分离形貌被固定在相分离的较早阶段,起到有效调控相分离形貌的作用. Epoxy resin/PEI/MWCNTs composites were prepared by solution blending,and the effects of MWCNTs with hydroxyl group on the phase separation of the systems were investigated by scanning electron microscope(SEM),infra-red spectrum(IR),rheological measurements and differential scanning calorimetry(DSC).The SEM results showed that the MWCNTs were uniformly dispersed in both phases of the composite after curing.The phase separation morphology of epoxy resin/PEI blends without MWCNTs or containing 0.75 pbw MWCNTs showed an island-sea structure,and the blend containing more MWCNTs presented a bicontinuous structure when the blends were cured at 150℃.And when the blends were cured at 120℃,the phase separation morphology of the blends without MWCNTs or containing 0.75 pbw MWCNTs showed a bicontinuous structure and the blend containing more MWCNTs presented a phase inversion structure.The IR and DSC data showed that the rate of curing reaction was accelerated and the activity energy of the curing reaction was decreased by introducing MWCNTs into the system due to the existence of the hydroxyl group on their surface.In addition,the results of rheological measurements revealed the fact that,for one hand,the MWCNTs which crossed both phases increased the viscosity of the system,causing an inhibiting effcet on phase separation;for another hand,the gelation time of the composites decreased as the MWCNTs content increased,which indicated that the addition of MWCNTs to the blend restricted the phase separation and morphology evolution in the earlier stage of phase separation,implying that the introduction of MWCNTs with hydroxyl groups into the system was a feasible method to achieve the goal of phase morphology control.
作者 张晶 谢续明
出处 《高分子学报》 SCIE CAS CSCD 北大核心 2012年第2期215-222,共8页 Acta Polymerica Sinica
关键词 MWCNTS 聚醚酰亚胺 环氧树脂 相分离 MWCNTs PEI Epoxy resin Phase separation
  • 相关文献

参考文献41

  • 1Ellis B,ed. Chemistry and Technology of Epoxy Resins. London:Blackie Academic and Professional, 1993.1 -4.
  • 2Frigione M E, Mascia L, Acierno D. Eur Polym J, 1995,31 ( 11 ) : 102 ! - 1029.
  • 3Lijima T,Suzuki N,Fukuda W,Tomoi M. Eur Polym J,1995,31(8) :775 -783.
  • 4薛书凯,张炜,侯卫国.环氧树脂增韧新途径及增韧机理的研究[J].热固性树脂,2005,20(5):36-40. 被引量:27
  • 5Yamanaka K, Inoue T. J Mater Sci, 1990,25 (1) :241 -245.
  • 6Kim S C,Ko M B,Jo W H. Polymer,1995,36(ll) :2189 -2195.
  • 7刘小云,余英丰,甘文君,唐晓林,李善君.热塑性树脂改性热固性树脂体系固化反应诱导相分离研究进展[J].材料导报,2007,21(4):34-40. 被引量:11
  • 8MacKinnon A J, Jenkins S D, MeGrail P T, Pethrick R A. M acromoleeules, 1992,25 (13 ) :3492 -3499.
  • 9Kim B S,Chiba T,Inoue T. Polymer,1995,36(1) :43 -47.
  • 10Kim B S, Chiba T, Inoue T. Polymer, 1995,36 ( 1 ) :67 - 71.

二级参考文献129

共引文献84

同被引文献15

  • 1汪华锋,李振华,王新庆,王淼.纳米碳管/环氧树脂复合材料的制备及力学性能[J].复合材料学报,2004,21(5):48-51. 被引量:14
  • 2初增泽,黄鹏程.聚醚砜改性对环氧树脂室温和超低温韧性及力学性能的影响[J].高分子材料科学与工程,2005,21(4):228-231. 被引量:7
  • 3Long-Cheng Tang,Yan-Jun Wan,Ke Peng,Yong-Bing Pei,Lian-Bin Wu,Li-Min Chen,Li-Jin Shu,Jian-Xiong Jiang,Guo-Qiao Lai.Fracture toughness and electrical conductivity of epoxy composites filled with carbon nanotubes and spherical particles[J].Composites Part A.2013
  • 4Arash Montazeri,Jafar Javadpour,Alireza Khavandi,Abbas Tcharkhtchi,Ali Mohajeri.Mechanical properties of multi-walled carbon nanotube/epoxy composites[J].Materials and Design.2010(9)
  • 5Zhen-Kun Chen,Jiao-Ping Yang,Qing-Qing Ni,Shao-Yun Fu,Yong-Gang Huang.Reinforcement of epoxy resins with multi-walled carbon nanotubes for enhancing cryogenic mechanical properties[J].Polymer.2009(19)
  • 6Byung Chul Kim,Sang Wook Park,Dai Gil Lee.Fracture toughness of the nano-particle reinforced epoxy composite[J].Composite Structures.2008(1)
  • 7Florian H. Gojny,Malte H.G. Wichmann,Bodo Fiedler,Karl Schulte.Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites – A comparative study[J].Composites Science and Technology.2005(15)
  • 8Andres, M.A.,Garmendia, J.,Valea, A.,Eceiza, A.,Mondragon, I.Fracture toughness of epoxy resins modified with polyethersulfone: influence of stoichiometry on the morphology of the mixtures[].Journal of Applied Polymer Science.1998
  • 9Iijima S.Helical microtubules of graphite carbon[].Nature.1991
  • 10American Society for Testing Materials.Standard test method for tensile properties of plastics[]..2010

引证文献1

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部