期刊文献+

蒙脱土改性环氧树脂及其复合材料性能研究 被引量:2

Study on properties of epoxy resin modified by MMT and composites
原文传递
导出
摘要 以蒙脱土(MMT)作为EP(环氧树脂)的改性剂制备EP/MMT纳米复合材料。考察了MMT含量对EP/MMT体系的凝胶时间、黏度和力学性能等影响。结果表明:MMT的加入明显缩短了EP体系的凝胶时间,并显著缩短了EP体系达到高黏度的时间;当w(MMT)=4%时,EP/MMT纳米复合材料的力学性能相对最好,其浇铸体的拉伸强度、弯曲强度和冲击强度分别为85 MPa、140 MPa和35 kJ/m2,其复合材料的拉伸强度和弯曲强度分别为160 MPa和200 MPa。 With montmorillonite (MMT) as modifier of epoxy resin (EP), an EP/MMT nano-composite was made. The influences of MMT contents were investigated on gelation time, viscosity and mechanical properties of EP/MMT systems. The results showed that the adding MMT could obviously reduce gelation time of EP system,and could obviously reduce time of EP system to achieve high viscosity. The EP/MMT nano-composite had reversely optimal mechanical properties because the tensile strength ,bend strength and impact strength of resin casting were 85 MPa, 140 MPa and 35 kJ/m2 respectively,and the tensile strength and bend strength of composite were 160 MPa and 200 MPa respectively when mass fraction of MMT was 4%.
出处 《中国胶粘剂》 CAS 北大核心 2012年第1期49-52,共4页 China Adhesives
基金 山西省科技创新计划项目(2009101004)
关键词 环氧树脂 蒙脱土 复合材料 凝胶时间 黏度 力学性能 epoxy resin (EP) montmorillonite (MMT) composite gelation time viscosity mechanical property
  • 相关文献

参考文献13

二级参考文献174

共引文献125

同被引文献35

  • 1邹小平.水下胶粘剂的研究与应用[J].粘接,1996,17(3):23-28. 被引量:11
  • 2邹小平.水下胶粘剂的研究与应用[J].中国胶粘剂,1996,5(2):19-20. 被引量:1
  • 3Mirmohseni A,Zavareh S.Preparation and characterization of an epoxy nanocomposite toughened by a combination of thermoplastic,layered and particulate nano-fillers[J].Materials and Design,2010,31(6):2699- 2706.
  • 4Phonthammachai N,Li X,Wong S,et al.Fabrication of CFRP from high performance clay/epoxy nanocomposite: preparation conditions, therrnal-mechanical properties and interlaminar fracture characteristics[J].Composites Part A: Applied Science and Manufacturing,2011,42(8):881-887.
  • 5Roy N,Sengupta R,Bhowmick A K.Modifications of carbon for polymer composites and nanocomposites[J].Progress in Polymer Science,2012,37(6):781-819.
  • 6Luo Z,Cai X,Hong R Y,et al.Surface modification of multiwalled carbon nanotubes via gliding arc plasma for the reinforcement of polypropylene[J].Journal of Applied Polymer Science,2013,127(6) :4756-4763.
  • 7Guo X S,Yu D M,Wu J S,et al.Effects of nanotube modification on the dielectric behaviors and mechanical properties of multiwall carbon nanotubes/epoxy composites[J].Polymer Engineering & Science,2013,53(2):370-377.
  • 8Chen Q,Zhao Y,Zhou Z P,et al.Fabrication and mechanical properties of hybrid multi-scale epoxy composites reinforced with conventional carbon fiber fabrics surface-attached with electrospun carbon nanofiber mats[J] .Composites Part B: Engineering,2013,44(1):1-7.
  • 9Giliopoulos D J,Triantafyllidis K S,Gournis D.Chemical functionalization of carbon nanotubes for dispersion in epoxy matrices[J].Carbon Nanotube Enhanced Aerospace Composite Materials,2013,188:155-183.
  • 10Lavorgna M,Romeo V,Martone A,et al.Silanization and silica enrichment of multiwalled carbon nanotubes: Synergistic effects on the thermal-mechanical properties of epoxy nanocomposites[J].European Polymer Journal,2013,49(2) :428-438.

引证文献2

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部