期刊文献+

对4种国产核级焊接材料的评述 被引量:4

Review for Four Domestic Welding Materials in Nuclear Application
下载PDF
导出
摘要 对国内两家公司提出的核级焊接材料J427HR焊条、埋弧焊用H08MnHR焊丝和SJ14HR焊剂及E5018-1焊条存在的问题进行了分析。认为这些焊接材料都不是焊材新品种,都可以为已有的标准焊材所涵盖,只不过由于用于核电产品,要求较严格而已。可采用标准焊材加附加要求的办法给予解决,这也是目前各国普遍采用的办法。 A review of 4 domestic nuclear class welding fillers J427HR, E5018-1, H08MnHR welding wire and SJ14HR flux was made, and the existing problems, the conclusion said that the fillers discussed are nothing new more than the standardized ones with some stricter require- ments, which are covered within standard weld materials, lust for the use in nuclear area. It is the general solution adopted in the word nowadays. The supplementary requirement for welding materials could be adopted and this is the way used in the foreign countries now.
出处 《石油化工设备》 CAS 2012年第1期48-55,共8页 Petro-Chemical Equipment
关键词 核级焊材 识别标识 特殊要求 RCC-M CODE nuclear application weld fillers identification marking system supplementary requirements RCC-M Code
  • 相关文献

参考文献17

  • 1核工业第二研究设计院.0015T260,20HR(P265GH)配套焊材采购技术规格书,B版,岭澳核电站3,4号机组[Z].2006-08.
  • 2核工业第二研究设计院.0426T260,20HR(P265GH)配套焊材采购技术规格书,A版,福建福清核电站1,2号机组[Z].2008-02.
  • 3中国核电工程公司.Q/CNPE/J103.51-2009,20HR(P265GH)配套焊材采购技术规格书[Z].2009-10-14.
  • 4中国核工业华兴建设有限公司核电事业部.核电用E5018-1焊材采购技术规格书[Z].2008-10-08.
  • 5ASME Boiler and Pressure Vessel Code, Section II, Part C,Specifications for Welding Rods, Electrodes and Filler Metals, 2007 Edit. with 2007 up to and incl. 2009 Addenda[S].
  • 6ASME Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels, 2007 Edit. with 2007 up to and incl. 2009 Addenda[S].
  • 7ASME Boiler and Pressure Vessel Code, Section VIII, Division 2, Alternative Rules, Rules for Construction of Pressure Vessels, 2007 Edit. with 2007 up to and incl. 2009 Addenda[S].
  • 8GB/T 5117-1995,碳钢焊条[S].
  • 9GB/T5293-1999,埋弧焊用碳钢焊丝和焊剂[S].
  • 10ASTM E527-83 (Reapproved 2003), Standard Practice of Numbering Metals and Alloys [S].

二级参考文献27

  • 1ASME Boiler and Pressure Vessel Code, Section III, Division 1, Subsection NB, Class 1 Components, Edition 2004 with 2004 Addenda [S].
  • 2ASME Boiler and Pressure Vessel Code, Section III, Division 1, Subsection NC, Class 2 Components, Edition 2004 with 2004 Addenda [S].
  • 3ASME Boiler and Pressure Vessel Code, Section III, Division 1, Subsection ND, Class MC Components, Edition 2004 with 2004 Addenda [S].
  • 4ASME Boiler and Pressure Vessel Code, Section III, Division 1,Subsection NE, Class 3 Components, Edition 2004 with 2004 Addenda [S].
  • 5ASME Boiler and Pressure Vessel Code, Section III, Division 1, Subsection NF, Supports, Edition 2004 with 2004 Addenda [S].
  • 6ASME Boiler and Pressure Vessel Code, Section III, Division 1, Subsection NG, Core Support Structures, Edition 2004 with 2004 Addenda [S].
  • 7ASME Boiler and Pressure Vessel Code, Section Ill, Division 1, Subsection NH, Class 1 Components in Elevated Temperature Service, Edition 2004 with 2004 Addenda[S].
  • 8ASTM E 208--91, Standard Method for Conducting Drop-Weight Test to Determine Nil-Ductile Transition Temperature of Ferritic Steels [S].
  • 9ASME Boiler and Pressure Vessel Code, Section IX, Welding and Brazing Qualification, Section 2007, with 1007 up to and incl. 2009 Addenda [S].
  • 10ASME Boiler and Pressure Vessel Code, Section III, Subsection NCA, General Requirements for Division 1 and Division 2, Edition 2004 with 2004 Addenda [S].

共引文献16

同被引文献20

  • 1孙万田,申飞.压力管道的焊接质量控制[J].焊接技术,2011,40(S1):5-7. 被引量:2
  • 2谢进平,黎中发,熊梅,戴维新,王京军,谭长瑛.核电站用20HR配套焊条MK·J427HR的研制及其标准的制定[J].焊接技术,1995,24(4):13-14. 被引量:1
  • 3RCC-M, Design and Construction Rules for Mechani- cal Components of' PWR Nuclear Islands, Section IV, 2000 Edition[S].
  • 4ASME Boiler and Pressure Vessel Code, Section III, Subsection NCA, General Requirements for Division 1 and Division 2, 2004 Edition[S].
  • 5SFA-5.23,低合金钢埋弧焊焊丝和焊剂[S].
  • 6ASME Boiler and Pressure Vessel Code, Section II, Part C, Specifications for Welding Rods, Electrodes, and Fill- er Metals, 2007 Edition[S].
  • 7DIN EN 499, Covered Electrodes for Manual Arc Welding of Non-alloy and Fine Grain Steels, Classification ( English Version), 1994 Edition[S].
  • 8SFA-5.1,手工电弧焊用碳钢焊条[S].
  • 9GB/T 5117-1995,碳钢焊条[S].
  • 10郭晶,李艳,史雪芬.焊接工艺规程编制、评定和应用中的若干问题[J].石油化工设备,2010,39(4):39-45. 被引量:4

引证文献4

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部