期刊文献+

层状Li_(1.3)Ni_(0.35)Mn_(0.65)O_(2.3)锂离子电池正极材料制备与表征

Synthesis and characterization of Li_(1.3)Ni_(0.35)Mn_(0.65)O_(2.3) with layered structure as positive material of lithium batteries
下载PDF
导出
摘要 通过共沉淀法制备了Ni0.35Mn0.65(OH)2,并与碳酸锂混合,经高温煅烧得到层状Li1.3Ni0.35Mn0.65O2.3。通过XRD(X射线衍射)、SEM(扫描电子显微镜)和电化学性能测试对所得样品进行了表征。考察了烧结温度和烧结时间对材料的结构和电化学性能的影响。结果表明,在优化条件下合成的正极材料具有很好的α-NaFeO2型层状结构,粒度分布均匀,形貌呈球形。以0.1 C的电流在2.0~4.6 V充放电时,放电比容量达180~220 mAh/g,同时具有良好的循环可逆性能。 The layered Li1.3Ni0.35Mn0.65O2.3 was synthesized with co-precipitated metal hydroxide precursors Ni0.35Mn0.65-(OH)2 and characterized by XRD,SEM and charge discharge cycling.The effect of sintering temperature and sintering time on the electrochemical performance was studied.The result of XRD and SEM shows that the positive material has well-defined α-NaFeO2 layered structure and is spherical with uniform granularity.The materials exhibited high specific capacity of 180-220 mAh/g and excellent cycle performance between 2.0 V and 4.6 V at a current of 0.1 C.
出处 《电源技术》 CAS CSCD 北大核心 2012年第2期161-164,共4页 Chinese Journal of Power Sources
基金 吉林省教育厅"十二五"科研规划项目(吉教科合字[2008]第111号)
关键词 锂离子电池 Li1.3Ni0.35Mn0.65O2.3 正极材料 电化学性能 lithium batteries Li1.3Ni0.35Mn0.65O2.3 the positive material electrochemical properties
  • 相关文献

参考文献18

  • 1OHZUKU T, UEDA A. Solid-state redox reactions of LiCoO2(R-3m) for 4 volt secondary lithium cells[J]. J Electrochem Soc, 1994, 141 (11): 2972.
  • 2PENG Z S, WAN C R, TIANG C Y. Synthesis by sol-gel process and characterization of LiCoO2 cathode materials [J].J Power Sources, 1998, 72(2): 215.
  • 3DAVIDSON I, GREEDAN J E, MICHAL C A, et al. Structure of 1T-Li2NiO2 from powder neutron diffraction[J]. Solid State Lonics, 1991, 46 (3/4): 243.
  • 4KWEON H J, KIM G B, LIM H S, et al. Synthesis of Li,Ni0.85Co0015O2 by the PVA-precursor method and charge-discharge characteristics of a lithium ion battery using this material as cathode [J]. J Power Sources, 1999, 83 (1/2): 84.
  • 5KANG S H, KIM J, STOLL M E, et al. Layered Li(Ni0.5-xMn0.5-xM2x')-O2 (M'=Co, A1, Ti;x=0,0.025) cathode materials for Li-ion rechargeable batteries[J]. J Power Sources, 2002, 112 (1): 41.
  • 6CHUNG K Y, KIM K B. Investigations into capacity fading as a result ofa Jahn-Teller distortion in 4 V LiMn2O4 thin film electrodes [J]. Electrochimica Acta, 2004, 49 (20): 3327.
  • 7TU J, ZHAO X B, XIE J, et al. Enhanced low voltage cycling stability of LiMn2O4 cathode by ZnO coating for lithium ion batteries [J]. J Alloys and Compounds, 2007, 432(1/2): 313.
  • 8KIM H S, CHO B W, CHOW L. Cycling performance of LiFePO4 cathode material for lithium secondary batteries[J]. J Power Sources, 2004, 132 (1/2): 235.
  • 9MELIGRANA G, GERBALDI C, TUEL A, et al. Hydrothermal synthesis of high surface LiFePO4 powders as cathode for Li-ion cells [J]. J Power Sources, 2006, 160(1): 516.
  • 10LIU H, LI C, ZHANG H P, et al.Kinetic study on LiFePO4/C nano- composites synthesized by solid state technique [J].J Power Sources, 2006, 159 (1): 717.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部