期刊文献+

某铜钼矿石的选矿试验研究 被引量:18

Experimental Study on Mineral Processing of a Copper-molybdenum Ore
下载PDF
导出
摘要 对某铜钼矿石进行了选矿试验研究。采用铜钼混选,铜钼混合粗精矿经一段再磨、铜钼一粗三精分离的浮选工艺流程,以石灰为调整剂,煤油为捕收剂混合浮选铜钼,QN为铜矿物抑制剂,进行铜钼分离,获得了钼精矿钼品位为48.12%、钼回收率为87.93%,铜精矿铜品位为13.19%、铜回收率为87.16%。 Beneficiation test was conducted for a copper-molybdenum ore using a flowsheet comprised of a bulk flotation, a regrinding of bulk concentrate, and a Mo/Cu separation with one roughing and three stages of cleaning. Cu-Mo bulk flotation was carried out with lime as the regulator and kerosene as the collector, while QN was used as a copper mineral depressant for Mo/Cu separation. A molybdenum concentrate with Mo grade of 48.12% was obtained with the Mo recovery of 87.93%, and a copper concentrate with Cu grade of 13.19% was obtained with the Cu recovery of 87. 16%.
作者 于雪
出处 《矿冶工程》 CAS CSCD 北大核心 2012年第1期32-35,共4页 Mining and Metallurgical Engineering
关键词 浮选 铜钼矿石 铜钼分离 铜抑制剂QN 综合回收 flotation copper-molybdenum ore copper-molybdenum separation copper depressant QN comprehensiverecovery
  • 相关文献

参考文献5

二级参考文献3

共引文献63

同被引文献97

引证文献18

二级引证文献89

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部