摘要
背景:介孔结构的二氧化钛涂层除了具有一般介孔材料的优点外,还具有很好的生物相容性和独特的抗菌性,并且在钛及钛合金表面很易形成。目的:对介孔诱导型二氧化钛涂层和普通的二氧化钛涂层进行形貌结构分析和比较,为钛合金表面介孔结构二氧化钛涂层在生物医学领域的应用提供实验和理论基础。方法:在Ti-6Al-4V合金表面采用模板法和非模板法制备介孔诱导型二氧化钛涂层和普通二氧化钛涂层,使用场发射扫描电子显微镜、快速比表面积/孔隙分析仪和X射线衍射仪对两种二氧化钛涂层的表面形貌结构进行比较分析。结果与结论:在Ti-6Al-4V合金表面制备的稳定介孔二氧化钛涂层,其平均介孔孔径、比表面积和孔容分别为6.6680nm、124.1906m2/g和0.256470cm3/g,具有介孔结构大比表面积和孔容的特点,适合对医用钛及钛合金改性。
BACKGROUND： Besides general advantages of mesoporous materials, mesoporous titania coatings have a good biocompatibility and antibiotic property which are suitable to modify the surfaces of titanium （Ti） and its alloy. OBJECTIVE： To compare and analyze the morphology and structure of mesoporous titania coatings and conventional titania coatings in order to provide experimental and theoretical basis for the mesoporous titania coatings applying to the biomedical field. METHODS： The template method and non-template method were adopted to prepare the mesoporous titania coatings and conventional titania coatings on the surface of Ti-6Al-4V alloy. Then, the surface morphology observation and microstructure analysis were characterized by scanning electron microscope, fast specific surface area/porosity analyzer, and X-ray diffractometer. RESULTS AND CONCLUSION： It is validated that the stable mesoporous titania coatings have been prepared on the surface of Ti-6Al-4V alloy and this film displayed the characteristics of mesoporous structure possessing large specific surface and pore volume. The average pore diameter, specific surface area and pore volume were calculated to be 6.668 0 nm, 124.190 6 m^2/g and 0.256 470 cm^3/g, respectively. Mesoporous titania coatings are suited to modify the surface of medical Ti and its alloys.
出处
《中国组织工程研究》
CAS
CSCD
2012年第8期1439-1442,共4页
Chinese Journal of Tissue Engineering Research
基金
国家自然科学基金(50801065)
中国科学院"百人计划"项目~~
