期刊文献+

基于RecurDyn的纸张无芯起卷影响因素研究 被引量:1

Study on the Factors Affecting the Beginning of Coreless Rewinding Based on RecurDyn
下载PDF
导出
摘要 研究了纸张无芯复卷的起卷过程。基于纸张的扭簧-刚体薄片模型,借助RecurDyn软件对无芯起卷机构进行了动力学仿真,讨论了不同参数对无芯起卷的影响。结果表明,卷取轨道形状对无芯起卷有很大的影响,应使轨道约束形状尽量接近圆形;纸张厚度对无芯起卷有较大影响,当纸张厚度小于0.3mm时,可顺利起卷;纸张材料参数如杨氏模量对无芯起卷影响很小。 This paper researched the initial curling process of coreless rewinding. Based on the model of small rigid bar interconnected by revolute joint with rotational springdamper forces, dynamic simulation were performed with the software RecurDyn. The effect of different parameters on the performance of coreless rewinding was discussed. The results show that shape of the curved orbit has great effect on coreless rewinding. The orbit constraint should be closed to a circle as much as possible. The thickness of paper also has effect on coreless rewinding. When the thickness of paper is less than 0.3 ram,it can rewind smoothly. Material parameters of paper like Young's modulus have little effect on coreless rewinding.
出处 《机械与电子》 2012年第3期32-35,共4页 Machinery & Electronics
关键词 无芯起卷 RECURDYN 杨氏模量 coreless rewinding RecurDyn Young' s modulus
  • 相关文献

参考文献5

  • 1Yoshda K.Dynamic analysis of sheet deformation using spring-mass-beam model[J].ASME Proceedings IMECE,2003,(3):475-481.
  • 2Uraoka Akihiro,Rahn Christopher D.Simulation of a sheet-handling machine[J].Communication in NolinearScience and Numerical Simulation,2009,14(4):1617-1626.
  • 3张百灵,朱平,宇田川浩二.考虑空气阻力影响的纸张传送仿真研究[J].机械科学与技术,2009,28(5):587-590. 被引量:5
  • 4王冰,王兆伍.复印机进纸机构的动态分析和仿真研究[J].南京师范大学学报(工程技术版),2010,10(1):27-30. 被引量:5
  • 5Wu X,Kaneko S.Nonlinear analysis of sheet flutter subjected to a leakage flow based on multibody dy-namics[J].JSME International Journal,2003,46(2):500-507.

二级参考文献13

  • 1王玥.送纸胶辊用橡胶材料的开发[J].世界橡胶工业,2006,33(12):24-28. 被引量:8
  • 2Ishizawa S, et al. Unsteady viscous flow between parallel disks with a time-varying gap width and a central fluid source [ J ]. Journal of Fluids Engineering, 1987,109(4) :394 -402
  • 3Yoshida K. Dynamic analysis of sheet deformation using spring-mass-beam model [ J ]. Transactions of the Japan Society of Mechanical Engineers, 1997,63 (615) :3926- 3932
  • 4Yoshida K, Kondo K. Simulation technology for flexible media handling mechanism[ J]. Journal of the Japan Society for Simulatton Technology, 1998,17(1 ) :35 -43
  • 5Wang C Y. A critical review of the heavy elastic[J]. International Journal of Mechanical Science, 1986, 28: 549-559.
  • 6Stack K D, Benson R C. A study of friction feed paper separation [ J]. Journal of Engineering of Industry, 1993, 115. 236- 241.
  • 7Benson R C. The slippery sheet[ J]. ASME Journal of Tribology, 1995, 117: 47-52.
  • 8Kalker J J.三维弹性体的滚动接触[M].李自力,译.成都:西南交通大学出版社,1993.
  • 9张国强,吴家鸣.流体力学[M].北京:机械工业出版社,2005.
  • 10杨胜军,马军星,何正嘉.办公设备纸张自由振动的阻尼特性研究[J].西安交通大学学报,2000,34(7):48-51. 被引量:10

共引文献7

同被引文献11

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部